INSTALLATION PROCEDURE 1. INSTALL ENGINE OIL LEVEL SENSOR (a) Install the engine oil level sensor to the oil pan sub-assembly with the 2 nuts. Torque: 10 N·m {102 kgf·cm, 7 ft·lbf} (b) Install a new clip to the engine oil level sensor. 2. INSTALL OIL STRAINER SUB-ASSEMBLY Click here
3. INSTALL NO. 2 OIL PAN SUB-ASSEMBLY Click here 4. REMOVE ENGINE ASSEMBLY FROM ENGINE STAND Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lighting System(for Hv Model With Cornering Light): Headlight Dimmer Switch Circuit
DESCRIPTION The steering sensor receives the following switch information: Light control switch in DRL OFF, tail, head or AUTO position Dimmer switch in high, low or high flash (pass) position WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Before replacing the main body ECU (multiplex network body E ...
