Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Precaution

PRECAUTION

PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable from the negative (-) auxiliary battery terminal, initialize the following system(s) after the cable is reconnected:

HANDLING PRECAUTION FOR DYNAMIC RADAR CRUISE CONTROL SYSTEM

Keep in mind the following points when servicing vehicles equipped with the dynamic radar cruise control system.

(a) The dynamic radar cruise control system is designed to be used when driving on highways and freeways. The system may not operate correctly when driving on roads used by pedestrians and bicycles, and may result in an accident.

(b) Do not overly rely on the dynamic radar cruise control system.

• The dynamic radar cruise control system is designed to assist in maintaining an appropriate distance with the preceding vehicle, however, the system alone is not sufficient. Pay constant attention to the vehicle-to-vehicle distance and the traffic conditions when using the dynamic radar cruise control system and decelerate with the brake pedal or accelerate with the accelerator pedal according to the situation to keep an appropriate distance with the preceding vehicle.
• The dynamic radar cruise control system applies brakes as necessary, however, there is a limitation on the deceleration control capability. When the preceding vehicle decelerates rapidly or another vehicle moves in front of the vehicle, decelerating in time to avoid a collision may not be possible without additional braking.

(c) The millimeter wave radar sensor assembly dirt detection function.

• The millimeter wave radar sensor assembly can automatically detect dirt on the sensor face or the front or back surface of the front emblem, however, dirt may not always be detected.
• The dirt detection function may not operate if a metal object or plastic sheet with metal coating is attached to the sensor or the front emblem.
• The dirt detection function may not operate if there is snow or ice on the sensor or the front emblem.

HINT:

The preceding conditions may result in the vehicle being unable to maintain an appropriate distance with the preceding vehicle.

(d) Keep the sensor face and the front and back surfaces of the front emblem clean.

(e) The dynamic radar cruise control system does not operate or give a vehicle approach warning for vehicles which are stopped or driving at significantly slower speeds.

HINT:

This includes vehicles stopped at a tollgate or in traffic, or a preceding vehicle driving at significantly slower speeds.

(f) When following another vehicle with vehicle-to-vehicle distance control mode controlling vehicle speed, the vehicle will not accelerate if the +RES switch is pushed, as the speed is controlled in accordance with the speed of the preceding vehicle.

NOTICE:

If the set vehicle speed is increased by pushing the +RES switch, the vehicle will accelerate to the newly set speed when the preceding vehicle moves out of the lane.

HINT:

The set vehicle speed can be confirmed on the multi-information display.

(g) The actual vehicle-to-vehicle distance may be shorter than the set vehicle-to-vehicle distance when driving on a downhill road.

(h) When a system malfunction is detected, the master warning light illuminates, a warning message is displayed on the multi-information display in the combination meter assembly and the buzzer sounds.

(i) Keep the windshield glass clean.

(j) Do not apply excessive force to the forward recognition camera or subject it to a strong impact.

(k) Do not disassemble the forward recognition camera.

(l) Do not attach a sticker to the windshield glass in the area in front of the forward recognition camera.

(m) If the heater is used with FOOT mode selected, the upper area of the windshield glass may fog up, affecting the operation of the forward recognition camera.

HINT:

If the windshield glass fogs up, clear it using the front defroster.

(n) Do not damage the forward recognition camera lens or allow it to become dirty.

HINT:

• When cleaning the inner surface of the windshield glass, do not allow cleaning agent to contact the forward recognition camera lens.
• Do not touch the forward recognition camera lens.

(o) Do not place any objects on top of the instrument panel.

HINT:

If an object is reflecting off of the windshield glass, the performance of the forward recognition camera may decrease.

(p) The vehicle approach warning buzzer does not sound when constant speed control mode is controlling vehicle speed.

(q) As the controls performed by constant speed control mode and vehicle-to-vehicle distance control mode are different, always confirm which mode is selected before operating the dynamic radar cruise control system.

(r) Take the following precautions concerning the dynamic radar cruise control system.

(1) Turn the cruise control system off using the cruise control main switch when not using the cruise control system.

(2) Be careful as the vehicle speed may increase beyond the set vehicle speed when driving downhill even when the cruise control system is controlling vehicle speed.

(3) If the +RES switch is operated while the cruise control system is controlling vehicle speed or after control of vehicle speed by the cruise control system is canceled, the vehicle may accelerate.

(4) If the cruise control indicator turns off and a warning message is displayed when the cruise control system is controlling vehicle speed, turn the cruise control system off then on using the cruise control main switch and set the cruise control system vehicle set speed again. If the cruise control system does not turn on or stops functioning immediately after being set, there may be a malfunction in the cruise control system.

(5) Do not use the dynamic radar cruise control system where the road conditions are as follows:

• Heavy traffic
• Steep downhill roads
• Roads with sharp turns
• Icy or snowy roads
• Slippery roads

(s) Do not use the dynamic radar cruise control system while towing.

PRECAUTIONS WHEN REPLACING DRIVING SUPPORT ECU ASSEMBLY

When replacing the driving support ECU assembly, always replace it with a new one. If a driving support ECU assembly which was installed to another vehicle is used, the information stored in the driving support ECU assembly will not match the information from the vehicle. As a result, a DTC may be stored.

PRECAUTION WHEN REPLACING HYBRID VEHICLE CONTROL ECU

Before replacing the hybrid vehicle control ECU, refer to Registration.

Click here

HANDLING PRECAUTIONS FOR CAN COMMUNICATION SYSTEM

First check the CAN communication system by following How to Proceed with Troubleshooting. After checking that there are no malfunctions in the CAN communication system, proceed with troubleshooting.

Click here

HANDLING PRECAUTIONS FOR FORWARD RECOGNITION CAMERA

Click here

PRECAUTIONS WHEN REPLACING MILLIMETER WAVE RADAR SENSOR ASSEMBLY

• When replacing the millimeter wave radar sensor assembly, always replace it with a new one. When a new millimeter wave radar sensor assembly is installed to the vehicle, it receives vehicle information from the driving support ECU assembly and stores it. If a millimeter wave radar sensor assembly which was installed to another vehicle is used, the information stored in the driving support ECU assembly and millimeter wave radar sensor assembly will not match and a DTC may be stored.
• When the millimeter wave radar sensor assembly is replaced with a new one, adjustment of the radar sensor beam axis must be performed.

  Click here

PRECAUTION WHEN REPLACING SKID CONTROL ECU (BRAKE BOOSTER WITH MASTER CYLINDER ASSEMBLY)

After the skid control ECU (brake booster with master cylinder assembly) is replaced, perform the yaw rate sensor and G sensor zero point calibration and store the system information.

Click here