Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE LANE DEPARTURE ALERT SYSTEM (w/ Steering Control)

NOTICE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

(a) Customizing with the Multi-information display

(1) Turn the power switch on (IG).

(2) Enter the following menus: Settings Tab / Settings / Lane Departure Alert Setup

(3) Select the setting by referring to the table below.

(4) Change the settings of the lane departure alert system (w/ steering control) using the steering pad switch assembly.

HINT:

Each item is displayed on the "Setting" screen on the multi-information display.

Lane Departure Alert System (w/ Steering Control)

Display	Content	Setting	Default
Steering Assist	Steering control function	On/Off	On
Sensitivity	Timing of lane departure alert	High/Standard	Standard
Sway Warning	Vehicle sway warning function	On/Off	On
Sway Sensitivity	Sway warning sensitivity	High/Standard/Low	Standard

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Lost Communication between Hybrid Powertrain Control Module and Active Grille Air Shutter Missing Message (U129387)
DESCRIPTION The swing grille actuator assembly and hybrid vehicle control ECU assembly send and receive signals via CAN communication. If a communication error occurs between the swing grille actuator assembly and hybrid vehicle control ECU assembly, the ECM stores this DTC. DTC No. Detection Item D ...

Toyota Avalon (XX50) 2019-2022 Owners Manual