INSTALLATION PROCEDURE 1. INSTALL HYBRID VEHICLE CONTROL ECU (a) Install the hybrid vehicle control ECU with the bolt and nut. Torque: Bolt : 8.0 N·m {82 kgf·cm, 71 in·lbf} Nut : 5.5 N·m {56 kgf·cm, 49 in·lbf} (b) Connect the 4 hybrid vehicle control ECU connectors. 2. INSTALL NO. 3 INSTRUMENT PANEL TO COWL BRACE SUB-ASSEMBLY Click here 3. INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Fuel Injector(for Port Injection): Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during fuel injector assembly removal/installation are shown below. Necessary Procedures After Parts Removed/In ...
