Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Utility

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Power Source, Network / Networking / Can Communication System(for Gasoline Model) / Utility

UTILITY

INITIALIZE THE CONNECTION INFORMATION OF A GATEWAY FUNCTION EQUIPPED ECU (BUS MONITOR ECU)

(a) Connect the Techstream to the DLC3.

(b) Turn the engine switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus:

  • for Body Electrical / Central Gateway / Utility / Initialization
Body Electrical > Central Gateway > Utility

Tester Display

Initialization
  • for Body Electrical / Main Body / Utility / Initialization
Body Electrical > Main Body > Utility

Tester Display

Initialization

(e) Initialize the ECU.

    Tire Pressure Monitor ECU Communication Stop Mode

    Can Communication System(for Hv Model)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Safety Connect System(for Gasoline Model): Dcm Power Source Circuit
    DESCRIPTION This is the power source circuit to operate the DCM (Telematics Transceiver). WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system before performing the following procedure. PROCEDURE 1. CHECK HARNESS AND CONNECTOR (DCM (TELEMATICS TRANSCEI ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2025 Copyright www.tavalon.net
    0.0158