Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Data List / Active Test

DATA LIST / ACTIVE TEST

READ DATA LIST

HINT:

Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:

In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

(a) Turn the power switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the power switch on (IG).

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / Tilt & Telescopic / Data List.

(f) According to the display on the Techstream, read the Data List.

Body Electrical > Tilt&Telescopic > Data List

Tester Display

Measurement Item

Range

Normal Condition

Diagnostic Note

Total Distance Traveled

Driving distance

Min.: 0

Max.: 999999

-

-

Total Distance Traveled - Unit

Driving distance unit

km or mile

-

-

Tilt Up Limit

Uppermost tilt position

Not Memory or Memory

Not Memory: Position not memorized

Memory: Position memorized

-

Tilt Down Limit

Lowermost tilt position

Not Memory or Memory

Not Memory: Position not memorized

Memory: Position memorized

-

Telescopic Short Limit

Shortest telescopic position

Not Memory or Memory

Not Memory: Position not memorized

Memory: Position memorized

-

Telescopic Long Limit

Longest telescopic position

Not Memory or Memory

Not Memory: Position not memorized

Memory: Position memorized

-

Tilt&Telescopic Memory 1

Tilt and telescopic memory position 1

Not Memory or Memory

Not Memory: Position not memorized

Memory: Position memorized

-

Tilt&Telescopic Memory 2

Tilt and telescopic memory position 2

Not Memory or Memory

Not Memory: Position not memorized

Memory: Position memorized

-

Tilt&Telescopic Memory 3

Tilt and telescopic memory position 3

Not Memory or Memory

Not Memory: Position not memorized

Memory: Position memorized

-

Driver Information Memory 1

Driver Information Memory 1

Not Memory or Memory

-

-

Driver Information Memory 2

Driver Information Memory 2

Not Memory or Memory

-

-

Driver Information Memory 3

Driver Information Memory 3

Not Memory or Memory

-

-

Ignition Switch (CAN)

Communication state of power switch

OFF or ON

ON: Communication normal

OFF: Communication interrupted

-

Handle Position

Steering wheel position signal

Away or Return

Away: Steering wheel in away position

Return: Steering wheel in return position

-

Ignition Switch

Input state of power switch

OFF or ON

ON: Input signal normal

OFF: Input signal interrupted

-

Tilt Manual Switch Up

Input state of tilt up switch

OFF or ON

-

-

Tilt Manual Switch Down

Input state of tilt down switch

OFF or ON

-

-

Telescopic Manual Switch Short

Input state of telescopic contract switch

OFF or ON

-

-

Telescopic Manual Switch Long

Input state of telescopic extend switch

OFF or ON

-

-

Tilt&Telescopic Manual Switch Voltage

Voltage data of tilt and telescopic switch

Min.: 0.000 V

Max.: 4.998 V

Neutral position: Below 0.20 V

Tilt up: 1.67 to 2.13 V

Tilt down: 0.54 to 0.74 V

Telescopic contract: 1.08 to 1.40 V

Telescopic extend: 2.22 to 2.77 V

-

ECU Power Source Voltage

Voltage data of power supply

Min.: 0.000 V

Max.: 19.992 V

11.00 to 14.00 V

-

Tilt Position

Current tilt position data

Min.: 0

Max.: 65535

28627 to 36864

-

Telescopic Position

Current telescopic position data

Min.: 0

Max.: 65535

28627 to 36864

-

Tilt Return Memory Position

Memorized tilt return position data

Min.: 0

Max.: 65535

28627 to 36864

-

Telescopic Return Memory Position

Memorized telescopic return position data

Min.: 0

Max.: 65535

28627 to 36864

-

Tilt Up Limit Position

Uppermost tilt position data

Min.: 0

Max.: 65535

28627 to 36864

-

Tilt Down Limit Position

Lowermost tilt position data

Min.: 0

Max.: 65535

28627 to 36864

-

Telescopic Short Limit Position

Shortest telescopic position data

Min.: 0

Max.: 65535

28627 to 36864

-

Telescopic Long Limit Position

Longest telescopic position data

Min.: 0

Max.: 65535

28627 to 36864

-

Tilt Memory Position 1

Tilt data of memory position 1

Min.: 0

Max.: 65535

28627 to 36864

-

Telescopic Memory Position 1

Telescopic data of memory position 1

Min.: 0

Max.: 65535

28627 to 36864

-

Tilt Memory Position 2

Tilt data of memory position 2

Min.: 0

Max.: 65535

28627 to 36864

-

Telescopic Memory Position 2

Telescopic data of memory position 2

Min.: 0

Max.: 65535

28627 to 36864

-

Tilt Memory Position 3

Tilt data of memory position 3

Min.: 0

Max.: 65535

28627 to 36864

-

Telescopic Memory Position 3

Telescopic data of memory position 3

Min.: 0

Max.: 65535

28627 to 36864

-

Vehicle Speed

Vehicle speed data

Min.: 0 km/h (0 mph)

Max.: 255 km/h (158 mph)

Actual vehicle speed

-

Driver Tilt Memory Position 1

Driver tilt memory position 1

Min.: 0

Max.: 65535

28627 to 36864

-

Driver Telescopic Memory Position 1

Driver telescopic memory position 1

Min.: 0

Max.: 65535

28627 to 36864

-

Driver Tilt Memory Position 2

Driver tilt memory position 2

Min.: 0

Max.: 65535

28627 to 36864

-

Driver Telescopic Memory Position 2

Driver telescopic memory position 2

Min.: 0

Max.: 65535

28627 to 36864

-

Driver Tilt Memory Position 3

Driver tilt memory position 3

Min.: 0

Max.: 65535

28627 to 36864

-

Driver Telescopic Memory Position 3

Driver telescopic memory position 3

Min.: 0

Max.: 65535

28627 to 36864

-

Tilt Motor Machine Lock Memory Data

Tilt Motor Machine Lock Memory Data

Not Exist or Existed

-

-

Telescopic Motor Machine Lock Memory Data

Telescopic Motor Machine Lock Memory Data

Not Exist or Existed

-

-

Autoaway/Return Operation Setting

Autoaway/Return Operation Setting

Tilt&Telescopic OFF, Telescopic ON, Tilt ON or Tilt&Telescopic ON

Tilt&Telescopic OFF: Tilt and telescopic operations prohibited

Telescopic ON: Only telescopic operations permitted

Tilt ON: Only tilt operations permitted

Tilt&Telescopic ON: Tilt and telescopic operations permitted

-

ACTIVE TEST

HINT:

Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

(a) Turn the power switch off.

(b) Connect the Techstream to the DLC3.

(c) Turn the power switch on (IG).

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / Tilt & Telescopic / Active Test.

(f) According to the display on the Techstream, perform the Active Test.

Body Electrical > Tilt&Telescopic > Active Test

Tester Display

Measurement Item

Control Range

Tilt Motor

Tilt operation

UP/DOWN

Telescopic Motor

Telescopic operation

LONG/SHORT

    Customize Parameters

    Diagnosis System

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Hybrid Control System: Hybrid/EV Battery Control System Over Temperature (P30004B)
    DESCRIPTION The hybrid vehicle control ECU monitors its internal operation and detects the following malfunction. DTC No. Detection Item DTC Detection Condition Trouble Area MIL Warning Indicate P30004B Hybrid/EV Battery Control System Over Temperature The HV battery temperature becomes too high due ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.021