|
DTC No. | Detection Item |
DTC Detection Condition | Link |
|
B26031C | Tilt and Telescopic Manual Switch Circuit Circuit Voltage Out of Range |
When operating the tilt and telescopic switch, an abnormal voltage value is sent to the multiplex tilt and telescopic ECU. |
 |
|
B261096 | Tilt Position Sensor or Tilt Motor Circuit Component Internal Failure |
Tilt operation stops within the operation range while operating. |
|
|
B261196 | Telescopic Position Sensor or Telescopic Motor Circuit Component Internal Failure |
Telescopic operation stops within the operation range while operating. |
|
|
B2620A2 | ECU Power Source Circuit System Voltage Low |
The voltage of the ECU power source drops to 8 V or less for 10 seconds or more. |
|
|
U014287 | Lost Communication with Body Control Module "B" Missing Message |
One of the following conditions is met:
- Signals (memory-related data) from the main body ECU (multiplex network body ECU) are interrupted for 3.3 seconds.
- Signals (IG switch signals) from the main body ECU (multiplex network body ECU) are interrupted for 10 seconds or more.
|
|
|
U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message |
Signals from the combination meter assembly are interrupted for 10 seconds or more. |
|
|
U020887 | Lost Communication with "Seat Control Module A" Missing Message |
Signals
(memory or recall request signal) received from the position control
ECU assembly (driver seat) are interrupted for 10 seconds or more. |
|
