DTC CHECK / CLEAR CHECK FOR DTC (a) Turn the engine switch off. (b) Connect the Techstream to the DLC3. (c) Turn the engine switch on (IG). (d) Turn the Techstream on. (e) Enter the following menus: Chassis / Air suspension / Trouble Codes. Chassis > Air suspension > Trouble CodesHINT: When freeze frame data is stored, check the freeze frame data. Click here (f) Read the DTCs by following the prompts on the Techstream screen. HINT: Refer to the Techstream operator's manual for further details. (g) Refer to Diagnostic Trouble Code Chart for DTC information. Click here
CLEAR DTC HINT: After repairing the malfunctions, clear the DTCs. (a) Turn the engine switch off. (b) Connect the Techstream to the DLC3. (c) Turn the engine switch on (IG). (d) Turn the Techstream on. (e) Enter the following menus: Chassis / Air suspension / Trouble Codes. Chassis > Air suspension > Clear DTCsNOTICE: DTCs and freeze frame data are cleared at the same time. (f) Clear the DTCs by following the prompts on the Techstream screen. HINT: Refer to the Techstream operator's manual for further details. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Can Communication System(for Hv Model): Check Bus 2 Line for Short to GND
DESCRIPTION There may be a short circuit between one of the CAN bus lines and GND when there is no resistance between terminal 18 (CA4H) of the central gateway ECU (network gateway ECU) and terminal 4 (CG) of the DLC3, or terminal 17 (CA4L) of the central gateway ECU (network gateway ECU) and termin ...
