Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL ACCELERATION SENSOR ASSEMBLY LH (for LH Side)

(a) Install the acceleration sensor assembly LH with the 2 nuts. Torque: 13 N·m {133 kgf·cm, 10 ft·lbf} NOTICE: Avoid any impact to the acceleration sensor assembly LH. Do not drop the acceleration sensor assembly LH. If it is dropped, replace it with a new one.

(b) Engage the clamp.

(c) Connect the connector to the acceleration sensor assembly LH.

2. INSTALL ACCELERATION SENSOR ASSEMBLY RH (for RH Side)

(a) Insert the guide to the body hole and install the acceleration sensor assembly RH with the bolt. Torque: 7.5 N·m {76 kgf·cm, 66 in·lbf} NOTICE: Avoid any impact to the acceleration sensor assembly RH. Do not drop the acceleration sensor assembly RH. If it is dropped, replace it with a new one.

(b) Connect the connector to the acceleration sensor assembly RH.

3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for LH Side)

Click here

4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH (for LH Side)

Click here

5. INSTALL FRONT DOOR SCUFF PLATE LH (for LH Side)

Click here

6. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY (for RH Side)

Click here

7. INSTALL INSTRUMENT SIDE PANEL RH (for RH Side)

Click here

8. INSTALL GLOVE COMPARTMENT PLATE (for RH Side)

Click here

9. CONNECT FRONT DOOR OPENING TRIM WEATHERSTRIP RH (for RH Side)

10. INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH (for RH Side)

HINT:

Use the same procedure as for the LH side.

Click here

11. INSTALL FRONT DOOR SCUFF PLATE RH (for RH Side)

HINT:

Use the same procedure as for the LH side.

Click here