Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:

  • Do not drop the tire pressure warning ECU and receiver, strike it with tools or subject it to impact.
  • If the tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.

(a) Connect the connector.

(b) Engage the 2 guides and install the tire pressure warning ECU and receiver with the bolt.

Torque:

8.3 N·m {85 kgf·cm, 73 in·lbf}

2. INSTALL ROOF SIDE INNER GARNISH RH

Click here

3. REGISTER TRANSMITTER ID

for HV Model: Click here

for Gasoline Model: Click here

4. INSPECT TIRE PRESSURE WARNING SYSTEM

for HV Model: Click here

for Gasoline Model: Click here

5. PERFORM INITIALIZATION

for HV Model: Click here

for Gasoline Model: Click here

6. PERFORM DIAGNOSTIC SYSTEM CHECK

for HV Model: Click here

for Gasoline Model: Click here

7. INSPECT SRS WARNING LIGHT

for HV Model: Click here

for Gasoline Model: Click here

    Components

    Removal

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Smart Key System(for Start Function, Hv Model): Lost Communication with ECM / PCM (U0100,U0140,U0142,U0155,U0293)
    DESCRIPTION These DTCs are stored when there is a CAN communication malfunction between the ECM, certification ECU (smart key ECU assembly), hybrid vehicle control ECU, main body ECU (multiplex network body ECU) or combination meter assembly, and data from the option connector (bus buffer ECU) canno ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2025 Copyright www.tavalon.net
    0.0146