INSPECTION PROCEDURE 1. INSPECT FUEL LID LOCK WITH MOTOR ASSEMBLY (a) Check the operation of the fuel lid lock with motor assembly (motor operation). (1) Apply auxiliary battery voltage to the fuel lid lock with motor assembly connector, and check the operation of the fuel lid lock with motor assembly. 
OK:
If the result is not as specified, replace the fuel lid lock with motor assembly. (b) Check the operation of the fuel lid lock with motor assembly (fuel lid courtesy switch). (1) Measure the resistance according the value(s) in the table below. Standard Resistance:
If the result is not as specified, replace the fuel lid lock with motor assembly. (c) Measure the shaft stroke. Standard:
If the result is not as specified, replace the fuel lid lock with motor assembly. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electronically Controlled Brake System(for Hv Model): ABS Warning Light Remains ON
DESCRIPTION The skid control ECU (brake booster with master cylinder assembly) is connected to the combination meter assembly via CAN communication. If any of the following is detected, the ABS warning light remains on: The skid control ECU (brake booster with master cylinder assembly) connector is ...
