Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Disassembly

DISASSEMBLY

PROCEDURE

1. REMOVE FRONT TELEVISION CAMERA ASSEMBLY (w/ Panoramic View Monitor System)

Click here

2. REMOVE FRONT CENTER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Click here

HINT:

Use the same procedure for the RH side and LH side.

3. REMOVE FRONT CORNER ULTRASONIC SENSOR (w/ Intuitive Parking Assist System)

Click here

HINT:

Use the same procedure for the RH side and LH side.

4. REMOVE NO. 4 ENGINE ROOM WIRE (w/ Intuitive Parking Assist System)

(a) Disengage the 11 clamps to remove the No. 4 engine room wire.

5. REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY (for Bar Type Radiator Grille)

(a) Remove the 4 screws.

(b) Remove the front licence plate bracket sub-assembly as shown in the illustration.

Remove in this Direction

6. REMOVE FRONT LICENSE PLATE BRACKET SUB-ASSEMBLY (for Mesh Type Radiator Grille)

(a) Remove the 4 screws.

(b) Remove the front licence plate bracket sub-assembly as shown in the illustration.

Remove in this Direction

7. REMOVE AIR INTAKE DUCT LH

(a) Remove the 2 screws and clip.

	Screw
	Clip

(b) Disengage the 4 guides to remove the air intake duct LH as shown in the illustration.

	Remove in this Direction (1)
	Remove in this Direction (2)

8. REMOVE AIR INTAKE DUCT RH

HINT:

Use the same procedure as for the LH side.

9. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY

Click here

10. REMOVE HOOD TO FRONT END PANEL SEAL

(a) Disengage the 4 clips.

Double-sided Tape

(b) Separate the double-sided tape and remove the hood to front end panel seal.

11. REMOVE RADIATOR GRILLE EMBLEM ASSEMBLY

(a) Remove the 2 screws.

(b) Disengage the 2 claws to remove the radiator grille emblem assembly.

12. REMOVE RADIATOR GRILLE SUB-ASSEMBLY

(a) Remove the 3 screws and 2 clips.

	Screw
	Clip

(b) Remove the 8 screws.

(c) Disengage the 4 claws and guide to remove the radiator grille sub-assembly.

13. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Bar Type Radiator Grille)

(a) Remove the 8 screws.

(b) Disengage the 23 claws and 5 guides to remove the lower radiator grille sub-assembly.

14. REMOVE LOWER RADIATOR GRILLE SUB-ASSEMBLY (for Mesh Type Radiator Grille)

(a) Remove the 8 screws.

(b) Disengage the 23 claws and 3 guides to remove the lower radiator grille sub-assembly.

15. REMOVE RADIATOR GRILLE (for Bar Type Radiator Grille)

(a) Remove the screw.

(b) Disengage the 6 claws and 6 guides to remove the radiator grille.

16. REMOVE FRONT BUMPER MOULDING (for Bar Type Radiator Grille)

(a) Remove the 6 screws.

(b) Disengage the 18 claws and 20 guides to remove the front bumper moulding.

17. REMOVE FRONT BUMPER SIDE RETAINER LH

(a) Remove the bolt (A) and bolt (B).

	Bolt (A)
	Bolt (B)

(b) Disengage the clip as shown in the illustration.

	Remove in this Direction (1)
	Remove in this Direction (2)

(c) Disengage the claw to remove the front bumper side retainer LH as shown in the illustration.

18. REMOVE FRONT BUMPER SIDE RETAINER RH

HINT:

Use the same procedure as for the LH side.

19. REMOVE NO. 2 FRONT BUMPER ENERGY ABSORBER

(a) Disengage the 4 guides to remove the No. 2 front bumper energy absorber as shown in the illustration.

Remove in this Direction

20. REMOVE FRONT BUMPER ENERGY ABSORBER

(a) Disengage the 2 guides to remove the front bumper energy absorber as shown in the illustration.

Remove in this Direction

21. REMOVE FRONT BUMPER REINFORCEMENT

(a) Remove the headlight assembly LH.

Click here

(b) Remove the headlight assembly RH.

HINT:

Use the same procedure as for the LH side.

(c) Disengage the 4 clamps.

(d) Remove the 8 bolts and front bumper reinforcement as shown in the illustration.

Remove in this Direction