CAUTION / NOTICE / HINT
HINT:
- Use the following procedure to troubleshoot the grille shutter system.
- *: Use the Techstream.
PROCEDURE
1. | VEHICLE BROUGHT TO WORKSHOP |
NEXT |
| |
2. |
CUSTOMER PROBLEM ANALYSIS |
HINT:
- In troubleshooting, confirm that the problem symptoms have been
accurately identified. Preconceptions should be discarded in order to
make an accurate judgment. To clearly understand what the problem
symptoms are, it is extremely important to ask the customer about the
problem and the conditions at the time the malfunction occurred.
- Gather as much information as possible for reference. Past problems that seem unrelated may also help in some cases.
- The following 5 items are important points for problem analysis:
What |
Vehicle model, system name |
When |
Date, time, occurrence frequency |
Where |
Road conditions |
Under what conditions? |
Driving conditions, weather conditions |
How did it happen? |
Problem symptoms |
NEXT |
| |
(a) Measure the auxiliary battery voltage with the power switch off.
Standard Voltage: 11 to 14 V If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.
(b) Check the fuses and relays. (c)
Check the connector connections and terminals to make sure that there
are no abnormalities such as loose connections, deformation, etc.
NEXT |
| |
4. |
CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM* |
(a) Using the Techstream, check for CAN communication system DTCs. Click here
Result | Proceed to |
CAN DTCs are not output |
A | CAN DTCs are output |
B |
B |
| GO TO CAN COMMUNICATION SYSTEM (for HV Model) |
A | | |
5. |
CHECK FOR DTC* (SFI SYSTEM) | (a) Check for DTCs. Powertrain > Engine > Trouble Codes
Result | Proceed to |
DTCs are not output | A |
DTCs are output | B |
B |
| GO TO SFI SYSTEM |
A | | |
6. |
CHECK FOR DTC* (GRILLE SHUTTER SYSTEM) |
(a) Check for DTCs. Body Electrical > Grill Shutter > Trouble Codes
Result | Proceed to |
DTCs are not output | A |
DTCs are output | B |
B |
| GO TO DIAGNOSTIC TROUBLE CODE CHART |
A | | |
7. |
PROBLEM SYMPTOMS TABLE | (a) Refer to Problem Symptoms Table.
Click here
Result | Proceed to |
Fault is not listed in Problem Symptoms Table |
A | Fault is listed in Problem Symptoms Table |
B |
B |
| GO TO STEP 9 |
A | | |
8. |
OVERALL ANALYSIS AND TROUBLESHOOTING* |
(a) Terminals of ECU Click here
(b) Data List / Active Test Click here
NEXT |
| |
NEXT |
| |
10. |
CHECK FOR DTC* (GRILLE SHUTTER SYSTEM) |
(a) Check for DTCs. Body Electrical > Grill Shutter > Trouble Codes
Result | Proceed to |
DTCs are not output | A |
DTCs are output | B |
A |
| END |
B |
| GO TO DIAGNOSTIC TROUBLE CODE CHART | |