REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during grille shutter removal/installation are shown below. Necessary Procedure After Parts Removed/Installed/Replaced
PROCEDURE 1. REMOVE FRONT BUMPER ASSEMBLY Click here 2. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE LH
3. REMOVE FRONT RADIATOR SIDE AIR GUIDE PLATE RH
4. REMOVE THERMISTOR ASSEMBLY Click here 5. REMOVE RADIATOR SHUTTER SUB-ASSEMBLY
(b) Disengage the clamp.
(d) Disengage the 2 guides to remove the radiator shutter sub-assembly as shown in the illustration.
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART SFI System DTC No. Detection Item MIL Memory Note Link P001001 Camshaft Position "A" Actuator Bank 1 General Electrical Failure Comes on DTC stored SAE Code: P0010 P001100 Camshaft Position "A" - Timing Over-Advanced or System Performance Bank 1 Comes on DTC stored SAE ...