PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE AUXILIARY BATTERY TERMINAL
NOTICE:
- After the power switch is turned off, the radio and display receiver
assembly records various types of memory and settings. As a result,
after turning the power switch off, make sure to wait at least 85
seconds before disconnecting the cable from the negative (-) auxiliary
battery terminal.
- When disconnecting the cable from the negative (-) auxiliary battery
terminal, initialize the following systems after the terminal is
reconnected.
|
System Name |
See Procedure |
|
Lane Departure Alert System (w/ Steering Control) |
|
|
Intelligent Clearance Sonar System |
|
Parking Assist Monitor System |
|
Panoramic View Monitor System |
|
Pre-collision System |
|
Lighting System (for HV Model with Cornering Light) |
NOTICE:
- When replacing the radio and display receiver assembly, always replace
it with a new one. If a radio and display receiver assembly which was
installed to another vehicle is used, the following may occur:
- A communication malfunction DTC may be stored.
- The radio and display receiver assembly may not operate normally.
- When replacing the DCM (telematics transceiver), be sure to replace it with a new one
PRECAUTION FOR AUDIO AND VISUAL SYSTEM (a) If any of the following parts are replaced, refer to Initialization in Repair Instruction.
Click here
- Radio and display receiver assembly*
- DCM (telematics transceiver)
- *: After replacing the radio and display receiver assembly of vehicles
subscribed to pay-type satellite radio broadcasts, SiriusXM radio ID
registration is necessary (w/ SXM Function).
|
