PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When
disconnecting the cable from the negative (-) battery terminal,
initialize the following systems after the cable is reconnected. |
System Name | See Procedure | |
Lane Departure Alert System (w/ Steering Control) |
 | |
Intelligent Clearance Sonar System | |
Parking Assist Monitor System | |
Panoramic View Monitor System | |
Pre-collision System | |
Lighting System (for Gasoline Model with Cornering Light) |
PRECAUTIONS FOR LIGHTING SYSTEM (a)
If the headlight ECU sub-assembly LH has been replaced, it is necessary
to synchronize the vehicle information the headlight ECU sub-assembly
LH. Click here (b)
If the headlight assembly LH has been replaced, it is necessary to
synchronize the vehicle information the headlight ECU sub-assembly LH. Click here
PRECAUTION FOR AUTOMATIC HIGH BEAM SYSTEM
(a) General Description The
automatic high beam system is a system that helps ensure visibility by
automatically turning the high beam headlights on and off. Additionally,
due to control limitations of the automatic high beam system, it may be
necessary to manually turn the high beam headlights on and off. For
safety reasons, make sure to turn the high beam headlights on and off
manually according to the driving conditions. (b) Conditions Unsuitable for Using Automatic High Beam System
Under
the following conditions, the automatic high beam system might not
detect other vehicles or lights correctly, or the high beam headlights
might cause glare or flash pedestrians or the occupants of other
vehicles. Manual operation should be considered. |
Factor | Condition | |
Weather/Climate | When driving in bad weather (rain, snow, fog, sandstorms, etc.). | |
Front windshield |
- When the windshield glass is not clear (ice, snow or frost on the glass).
- When the windshield glass is dirty (sand, mud, water stains or bugs on the glass).
- When the windshield glass is cracked.
- When the windshield glass is fogged-up.
- When the windshield glass has a film attached.
- When an object on the instrument panel reflects off of the windshield glass.
- When any other abnormal conditions exist with the windshield glass.
| | Forward recognition camera |
- When the forward recognition camera is deformed.
- When the forward recognition camera is dirty.
- When any other abnormal conditions exist with the forward recognition camera.
| | Nearby vehicles or lights |
- When lights similar to headlights or taillights are in the vicinity of the vehicle.
- When a nearby vehicle has no lights or its lights are off.
- When a vehicle in front has misaligned lights, or its lights are changing color.
- When a vehicle in front has extremely dirty headlights or taillights.
| | Road conditions |
- When driving in areas where the conditions often change between bright and dark.
- When driving on hilly roads.
- When driving on winding roads or around sharp curves.
- When driving on bumpy roads (cobblestone paving, gravel roads, rough unpaved roads, etc.).
- When highly reflective objects are in front of the vehicle (mirrors, road signs, etc.).
| | Own vehicle |
- When the headlights are damaged, deformed or dirty.
- When the vehicle posture is abnormal (posture has changed due to the
vehicle being fully loaded, a trailer being towed, road conditions,
etc.).
- When the vehicle has other malfunctions or has been modified.
| | Automatic high beam system |
Malfunction: When
the automatic high beam indicator light on the combination meter
assembly is off and "Headlight System Malfunction Visit Your Dealer" is
displayed on the multi-information display. Others:
- When the automatic high beam system does not seem to be turning the high beam headlights on and off properly.
- When the automatic high beam system is frequently turning the high beam headlights on and off.
- When the glare from the high beam headlights would disturb pedestrians or the drivers of other vehicles.
| PRECAUTION FOR FRONT CAMERA SYSTEM
Click here |
