Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Steering Position Sensor (B2414)

DESCRIPTION

The headlight ECU sub-assembly LH receives steering angle signals from the steering sensor via CAN communication and performs light control.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

B2414

Steering Position Sensor

  • The power switch is on (IG).
  • Sensor malfunction signals are continuously received from the steering sensor
  • 10 seconds or more

Electronically controlled brake system

Headlight ECU sub-assembly LH

WIRING DIAGRAM

PROCEDURE

1.

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.

(e) Clear the DTCs.

Body Electrical > HL AutoLeveling > Clear DTCs
NEXT

2.

CHECK FOR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Wait 10 seconds or more.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / HL AutoLeveling / Trouble Codes.

(f) Check for DTCs.

Body Electrical > HL AutoLeveling > Trouble Codes

OK:

DTC B2414 is not output.

OK

USE SIMULATION METHOD TO CHECK

NG

GO TO ELECTRONICALLY CONTROLLED BRAKE SYSTEM

    Light Sensor Circuit (B1244)

    Vehicle Speed Sensor (B2415)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Meter / Gauge System(for Gasoline Model): Engine Oil Pressure Switch Circuit
    DESCRIPTION The combination meter assembly and engine oil pressure switch assembly are connected via direct line. The combination meter assembly determines the engine oil pressure based on the engine oil pressure switch ON/OFF signal. HINT: The combination meter assembly receives engine RPM data sig ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0143