Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Control Module Communication Bus OFF (U0073,U0126,U0142,U0155,U0182)

DESCRIPTION

These DTCs are stored if a CAN communication malfunction occurs between the headlight ECU sub-assembly RH and other ECUs.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

DTC Output from

U0073

Control Module Communication Bus OFF

The headlight ECU sub-assembly RH does not send/receive data.

CAN communication system

Headlight ECU sub-assembly RH

U0126

Lost Communication with Steering Angle Sensor Module

The headlight ECU sub-assembly RH does not receive data from the steering sensor for approximately 10 seconds or more.

  • CAN communication system
  • Steering sensor

Headlight ECU sub-assembly RH

U0142

Lost Communication with Body Control Module "B"

The headlight ECU sub-assembly RH does not receive data from the main body ECU (multiplex network body ECU) for approximately 10 seconds or more.

  • CAN communication system
  • Main body ECU (multiplex network body ECU)

Headlight ECU sub-assembly RH

U0155

Lost Communication with Instrument Panel Cluster (IPC) Control Module

The headlight ECU sub-assembly RH does not receive data from the combination meter assembly for approximately 30 seconds or more.

  • CAN communication system
  • Combination meter assembly

Headlight ECU sub-assembly RH

U0182

Lost Communication With Lighting Control Module Front

The headlight ECU sub-assembly RH does not receive data from the headlight ECU sub-assembly LH for approximately 10 seconds or more.

  • CAN communication system
  • Headlight ECU sub-assembly LH

Headlight ECU sub-assembly RH

PROCEDURE

1.

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Body Electrical / HL AutoLeveling (Sub) / Trouble Codes.

(e) Clear the DTCs.

Body Electrical > HL AutoLeveling (Sub) > Clear DTCs
NEXT

2.

CHECK FOR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Wait 35 seconds or more.

(d) Turn the Techstream on.

(e) Enter the following menus: Body Electrical / HL AutoLeveling (Sub) / Trouble Codes.

(f) Check for DTCs.

Body Electrical > HL AutoLeveling (Sub) > Trouble Codes

OK:

DTCs are not output.

OK

USE SIMULATION METHOD TO CHECK

NG

GO TO CAN COMMUNICATION SYSTEM

    Control Module Communication Bus Off (U0073,U0101,U0126,U0129,U0142,U0155,U0242,U0293)

    Lost Communication With ECM/PCM "A" (U0100,...,U1117)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Power Tilt And Power Telescopic Steering Column System(for Gasoline Model): Tilt and Telescopic Manual Switch Circuit
    DESCRIPTION Different voltage values are sent to the multiplex tilt and telescopic ECU by operating the tilt and telescopic switch. The multiplex tilt and telescopic ECU then judges which motor and in which direction that motor should operate based on the voltage value. WIRING DIAGRAM PROCEDURE 1. R ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0186