INSPECTION PROCEDURE 1. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH (w/o Sequential Turn Light)
|
*a | Component without harness connected
(Rear Combination Light Assembly LH) | (a) Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights illuminate.
OK: |
Measurement Condition | Specified Condition | |
Auxiliary battery positive (+) → Terminal 1 (TL) Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight and side marker light illuminate | |
Auxiliary battery positive (+) → Terminal 2 (STP) Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates | |
Auxiliary battery positive (+) → Terminal 3 (TRN) Auxiliary battery negative (-) → Terminal 4 (E) |
Turn signal light illuminates | If the result is not as specified, replace the rear combination light assembly LH.
2. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH (w/o Sequential Turn Light)
|
*a | Component without harness connected
(Rear Combination Light Assembly RH) | (a) Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights illuminate.
OK: |
Measurement Condition | Specified Condition | |
Auxiliary battery positive (+) → Terminal 1 (TL) Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight and side marker light illuminate | |
Auxiliary battery positive (+) → Terminal 2 (STP) Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates | |
Auxiliary battery positive (+) → Terminal 3 (TRN) Auxiliary battery negative (-) → Terminal 4 (E) |
Turn signal light illuminates | If the result is not as specified, replace the rear combination light assembly RH.
3. INSPECT REAR COMBINATION LIGHT ASSEMBLY LH (w/ Sequential Turn Light)
|
*a | Component without harness connected
(Rear Combination Light Assembly LH) | (a) Apply auxiliary battery voltage to the rear combination light assembly LH and check that the lights illuminate.
OK: |
Measurement Condition | Specified Condition | |
Auxiliary battery positive (+) → Terminal 1 (TL) Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight and side marker light illuminates | |
Auxiliary battery positive (+) → Terminal 2 (STP) Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates | |
Auxiliary battery positive (+) → Terminal 3 (TRN) Auxiliary battery positive (+) → Terminal 6 (TRN2)
Auxiliary battery negative (-) → Terminal 4 (E) |
Turn signal lights illuminate | If the result is not as specified, replace the rear combination light assembly LH.
4. INSPECT REAR COMBINATION LIGHT ASSEMBLY RH (w/ Sequential Turn Light)
|
*a | Component without harness connected
(Rear Combination Light Assembly RH) | (a) Apply auxiliary battery voltage to the rear combination light assembly RH and check that the lights illuminate.
OK: |
Measurement Condition | Specified Condition | |
Auxiliary battery positive (+) → Terminal 1 (TL) Auxiliary battery negative (-) → Terminal 4 (E) |
Taillight and side marker light illuminates | |
Auxiliary battery positive (+) → Terminal 2 (STP) Auxiliary battery negative (-) → Terminal 4 (E) |
Stop light illuminates | |
Auxiliary battery positive (+) → Terminal 3 (TRN) Auxiliary battery positive (+) → Terminal 6 (TRN2)
Auxiliary battery negative (-) → Terminal 4 (E) |
Turn signal lights illuminate | If the result is not as specified, replace the rear combination light assembly RH. | 
