Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Remote Control System does not Operate

DESCRIPTION

The main body ECU (multiplex network body ECU) receives remote control signals from the driver door key cylinder or electrical key transmitter sub-assembly. Then, the main body ECU (multiplex network body ECU) activates the power window motor and sends the remote control signals to the sliding roof ECU (sliding roof drive gear assembly) via LIN communication. The sliding roof ECU (sliding roof drive gear assembly) receives those signals and activates the sliding roof motor.

CAUTION / NOTICE / HINT

NOTICE:

  • The sliding roof key-linked function and sliding roof wireless transmitter-linked function can be customized. Make sure that the customize settings of both functions are set to ON.

    Click here

  • If the sliding roof ECU (sliding roof drive gear assembly) is removed and reinstalled or replaced, the sliding roof ECU (sliding roof drive gear assembly) must be initialized.

    Click here

  • The sliding roof system uses the CAN and LIN communication systems. First, confirm that there are no malfunctions in the CAN and LIN communication systems. Refer to How to Proceed with Troubleshooting.

    Click here

  • If a sliding roof ECU (sliding roof drive gear assembly) DTC is output, first perform troubleshooting for the sliding roof ECU (sliding roof drive gear assembly) DTC.

    Click here

  • Before replacing the main body ECU (multiplex network body ECU), refer to Registration.

    Click here

PROCEDURE

1.

CHECK REMOTE CONTROL FUNCTION

(a) Check the key-linked and wireless transmitter-linked functions.

Click here

Result

Proceed to

Both the power windows and sliding roof operate by the key-linked and wireless transmitter-linked functions.

A

The sliding roof does not operate by the key-linked or wireless transmitter-linked function, but all of the power windows operate.

B

Both the power windows and sliding roof do not operate by the key-linked or wireless transmitter-linked function.

C

A

USE SIMULATION METHOD TO CHECK

C

GO TO POWER WINDOW CONTROL SYSTEM

B

2.

CHECK SLIDING ROOF OPERATION

(a) Check the sliding roof operation.

Click here

OK:

Sliding roof operates normally.

NG

GO TO OTHER PROBLEM (Sliding Roof does not Move by Operating Sliding Roof Control Switch)

OK

3.

REPLACE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)

(a) Replace the sliding roof ECU (sliding roof drive gear assembly).

Click here

NEXT

4.

INITIALIZE SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY)

(a) Initialize the sliding roof ECU (sliding roof drive gear assembly).

Click here

NEXT

5.

CHECK REMOTE CONTROL FUNCTION

(a) Check the key-linked and wireless transmitter-linked functions.

Click here

OK:

The key-linked and wireless transmitter-linked functions operate normally.

OK

END (SLIDING ROOF ECU (SLIDING ROOF DRIVE GEAR ASSEMBLY) WAS DEFECTIVE)

NG

REPLACE MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU)

    Problem Symptoms Table

    Sliding Roof does not Move by Operating Sliding Roof Control Switch

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lin Communication System(for Gasoline Model): Terminals Of Ecu
    TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) (a) Disconnect the MB main body ECU (multiplex network body ECU) connector. Click here (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0117