PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL
NOTICE: When
disconnecting the cable from the negative (-) battery terminal,
initialize the following systems after the cable is reconnected. |
System Name | See Procedure | |
Lane Departure Alert System (w/ Steering Control) |
 | |
Intelligent Clearance Sonar System | |
Parking Assist Monitor System | |
Panoramic View Monitor System | |
Pre-collision System | |
Lighting System (for Gasoline Model with Cornering Light) |
POWER WINDOW CONTROL SYSTEM PRECAUTIONS
NOTICE:
- The power window control system uses the LIN communication system and
CAN communication system. Inspect the communication functions by
following How to Proceed with Troubleshooting. Troubleshoot the power
window control system after confirming that the communication system is
functioning properly.
Click here
- The power window control system prohibits the auto up and down functions
if the jam protection function or catch protection function
malfunctions.
- If a power window regulator motor assembly has been replaced with a new one, initialize a power window control system.
Click here
- If a power window regulator motor assembly and door window regulator
sub-assembly have been removed and installed, or if a power window
regulator motor assembly was reused when a door glass or door glass run
was replaced, initialize the power window control system.
Click here
- The jam protection function or catch protection function may operate
unexpectedly, even when the power window control system is normal, due
to detection of a value different than the operation learned value when
the door glass moving speed changes sharply under any of the following
conditions:
- A power window is being opened or closed while the vehicle is driven on a rough road.
- A power window is being opened or closed while the door is being opened or closed.
- The voltage changes abruptly.
- Do not disconnect the battery while the engine switch is on (IG). Otherwise, DTC B2313 will be stored.
Click here
|
