Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Fail-safe Chart

FAIL-SAFE CHART

PULSE FAILURE

(a) If a pulse sensor built into the power window regulator motor assembly malfunctions, the following power window operations will be prohibited.

HINT:

• ●: Operates without catch protection
• ▲: Operates for approximately 0.4 seconds without jam protection
• X: Operation prohibited

• When the pulse sensor is normal, to deactivate fail-safe mode, pull up the power window switch to the auto up position and hold it for at least 1 second to fully close the power window from the fully open position. As a result, the auto up/down function will return.

DISPLACEMENT OF NON-DETECTION RANGE TO THE OPENING DIRECTION

(a) If the door glass position or learned value is abnormal, the following power window operations will be prohibited.

HINT:

• ●: Operates without jam protection/catch protection
• X: Operation prohibited

• When the pulse sensor is normal, to deactivate fail-safe mode, pull up the power window switch to the auto up position and hold it for at least 1 second to fully close the power window from the fully open position. As a result, the auto up/down function will return.

INITIAL FAILURE

(a) During initialization, if the power window position or initialization complete status cannot be properly read from the non-volatile memory, the following power window operations will be prohibited.

HINT:

• ●: Operates without jam protection/catch protection
• X: Operation prohibited

• Initialize the power window regulator motor assembly.

  Click here

LIN COMMUNICATION FAILURE

(a) If the LIN communication system is malfunctioning (communication stop), the following power window control operations will be prohibited. (Operation is only possible using the power window switch of each seat.)

HINT:

• ●: Operates without jam protection/catch protection
• *: Jam protection can operate.

• Check LIN communication system.

  Click here

PULSE FAILURE AND LIN COMMUNICATION FAILURE

(a) If the LIN communication system is malfunctioning (communication stop) and the pulse sensor is malfunctioning, the following power window operations will be prohibited.

HINT:

• X: Operation prohibited
• Switch on the door:

  When the jam protection function does not operate due to LIN communication failure, the manual up and auto up functions will not operate as the state of the IG signal is unknown.

• Remote switch operation:

  Operation is not possible during LIN communication failure.

DISPLACEMENT OF NON-DETECTION RANGE TO THE OPENING DIRECTION AND LIN COMMUNICATION FAILURE / INITIAL FAILURE AND LIN COMMUNICATION FAILURE

(a) If the LIN communication system is malfunctioning and the power window position and learned value are abnormal, or the LIN communication system is malfunctioning and the power window position or initialization complete status cannot be properly read from the non-volatile memory during initialization, the following power window operations will be prohibited.

HINT:

• ●: Operates without jam protection/catch protection
• X: Operation prohibited
• *: Jam protection can operate and window reverses upon reaching the fully closed position.
• Remote switch operation:

  Operation is not possible during LIN communication failure.