Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Removal

REMOVAL

CAUTION / NOTICE / HINT

HINT:

  • Use the same procedure for the RH side and LH side.
  • The following procedure is for the LH side.

PROCEDURE

1. REMOVE WASHER NOZZLE SUB-ASSEMBLY

(a) Using a screwdriver with its tip wrapped with protective tape, disengage the 2 claws as shown in the illustration to separate the washer nozzle sub-assembly.

*a

Protective Tape

Remove in this Direction (1)

Remove in this Direction (2)

NOTICE:

Be careful not to damage the windshield glass.

(b) Disconnect the washer hose to remove the washer nozzle sub-assembly.

NOTICE:

Washer nozzle sub-assemblies cannot be reused.

    On-vehicle Inspection

    Wiper And Washer System(for Gasoline Model)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Brake Pedal Stroke Sensor(for Hv Model): Installation
    INSTALLATION PROCEDURE 1. INSPECT AND ADJUST BRAKE PEDAL HEIGHT Click here 2. INSTALL BRAKE PEDAL STROKE SENSOR ASSEMBLY NOTICE: Do not drop the brake pedal stroke sensor assembly. If the brake pedal stroke sensor assembly has been dropped, replace the brake pedal stroke sensor assembly with a new o ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0275