|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note |
|
Wiper Switch HI (Line) |
Front wiper switch HI position signal (direct line) |
OFF or ON | OFF: Front wiper switch not in HI position
ON: Front wiper switch in HI position |
- |
| Wiper Stop Position |
Windshield wiper motor assembly position |
Store Are/Lower Rev Pos, Wipe Area or Upper Rev Pos |
Store Are/Lower Rev Pos: Lower reverse position or lower Wipe Area: Between lower reverse position and upper reverse position
Upper Rev Pos: Upper reverse position |
- |
| Wiper Position |
Windshield wiper motor assembly position |
Store Are, Exchange Position or Wipe Area |
Store Are: Out of wiper operating range Exchange Position: Within wiper maintenance position
Wipe Area: Within wiper operating range |
- |
| Status of Motor Lock |
Windshield wiper motor assembly status |
Normal or Lock | Normal: Operating normally
Lock: Malfunctioning |
- |
| Status of Temperature Protection |
Windshield wiper motor assembly temperature protection |
Normal, LO Operation, INT Operation or Stop |
Normal: Windshield wiper motor assembly temperature is below 95°C (203°F)
LO Operation: Windshield wiper motor assembly temperature is 95°C (203°F) or more
INT Operation: Windshield wiper motor assembly temperature is 100°C (212°F) or more
Stop: Windshield wiper motor assembly temperature is 105°C (221°F) or more |
- |
| Status of Overvoltage |
Windshield wiper motor assembly over voltage status |
Normal or Overvoltage | Normal: Operating normally
Overvoltage: Malfunctioning |
- |
| Status of Low Voltage |
Windshield wiper motor assembly low voltage status |
Normal or Low Voltage | Normal: Operating normally
Low voltage: Malfunctioning |
- |
| Motor Shaft Angle |
Windshield wiper motor assembly shaft angle status |
Min.: 0° Max.: 255° |
Almost the same as actual windshield wiper motor assembly shaft angle |
- |
| Motor Temperature |
Windshield wiper motor assembly temperature status |
Min.: -128°C (-198.4°F) Max.: 127°C (260.6°F) |
Almost the same as actual windshield wiper motor assembly temperature |
- |
| Motor Current |
Windshield wiper motor assembly current status |
Min.: 0 A Max.: 63 A |
Almost the same as actual windshield wiper motor assembly current |
- |
| Motor Power Supply Voltage |
Windshield wiper motor assembly voltage status |
Min.: 0 V Max.: 63 V |
Almost the same as actual windshield wiper motor assembly voltage |
- |
| Number of DTCs |
Number of trouble codes |
0 to 255 | Number of stored DTCs displayed |
- |
