Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT WINDSHIELD WIPER SWITCH ASSEMBLY

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Front Wiper Switch

Tester Connection

Condition

Specified Condition

14 (MIST) - 5 (E)

MIST position

Below 1 Ω

Except MIST position

10 kΩ or higher

10 (W-OFF) - 5 (E)

OFF position

Below 1 Ω

Except OFF position

10 kΩ or higher

13 (+S) - 5 (E)

INT position

Below 1 Ω

Except INT position

10 kΩ or higher

11 (+1) - 5 (E)

LO position

Below 1 Ω

Except LO position

10 kΩ or higher

12 (+2) - 5 (E)

HI position

Below 1 Ω

Except HI position

10 kΩ or higher

Front Washer Switch

Tester Connection

Condition

Specified Condition

15 (WF) - 5 (E)

ON position

Below 1 Ω

OFF position

10 kΩ or higher

Intermittent Time Adjustment Switch

Tester Connection

Condition

Specified Condition

4 (VR) - 5 (E)

P1 position

1102 Ω to 1218 Ω

P2 position

570 Ω to 630 Ω

P3 position

256.5 Ω to 283.5 Ω

P4 position

Below 1 Ω

If the result is not as specified, replace the windshield wiper switch assembly.

*a

Component without harness connected

(Windshield Wiper Switch Assembly)

    Components

    Installation

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electronically Controlled Brake System(for Gasoline Model): Skid Control ECU Malfunction (C1300)
    DESCRIPTION The skid control ECU (brake actuator assembly) stores this DTC if malfunctions are found in a circuit inside the ECU by self diagnosis. DTC No. Detection Item DTC Detection Condition Trouble Area C1300 Skid Control ECU Malfunction Internal failure of the skid control ECU (brake actuator ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2025 Copyright www.tavalon.net
    0.01