Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Installation

INSTALLATION

PROCEDURE

1. INSTALL ELECTRICAL KEY AND TIRE PRESSURE WARNING ECU AND RECEIVER

NOTICE:

• Do not drop, strike or otherwise subject the electrical key and tire pressure warning ECU and receiver to impact.
• If the electrical key and tire pressure warning ECU and receiver is subjected to an impact, replace it with a new one.

(a) Connect the connector.

(b) Engage the 2 guides and install the electrical key and tire pressure warning ECU and receiver with the bolt.

Torque:

8.3 N·m {85 kgf·cm, 73 in·lbf}

2. INSTALL ROOF SIDE INNER GARNISH RH

HINT:

Use the same procedure as for the LH side.

Click here

3. INSTALL ROOF SIDE RAIL GARNISH ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

Click here

4. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

Click here

5. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

HINT:

Use the same procedure as for the LH side.

Click here

6. INSTALL REAR SEAT CUSHION LOCK HOOK

Click here

7. INSTALL REAR SEAT CUSHION ASSEMBLY

Click here

8. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY

Click here

9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

for A25A-FXS:

Click here

for 2GR-FKS:

Click here

10. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD (w/ Seat Heater System)

Click here

11. INSTALL SPARE WHEEL COVER ASSEMBLY (w/ Seat Heater System)

Click here

12. INSTALL LUGGAGE TRIM SERVICE HOLE COVER (for HV Model)

Click here

13. REGISTER TRANSMITTER ID

for Gasoline Model:

Click here

for HV Model:

Click here

14. INSPECT TIRE PRESSURE WARNING SYSTEM

for Gasoline Model:

Click here

for HV Model:

Click here

15. PERFORM INITIALIZATION

for Gasoline Model:

Click here

for HV Model:

Click here

16. PERFORM DIAGNOSTIC SYSTEM CHECK

for Gasoline Model:

Click here

for HV Model:

Click here

17. INSPECT SRS WARNING LIGHT

for Gasoline Model:

Click here

for HV Model:

Click here