INSTALLATION PROCEDURE 1. INSTALL AUTOMATIC LIGHT CONTROL SENSOR (a) Engage the 2 claws to install the automatic light control sensor. 2. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH Click here 3. INSTALL FRONT PILLAR GARNISH RH HINT: Use the same procedure as for the LH side. Click here
4. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP RH Click here 5. INSTALL FRONT PILLAR GARNISH LH Click here 6. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electronically Controlled Brake System(for Hv Model): Brake Hold Standby Indicator Light Circuit
DESCRIPTION The brake hold standby indicator light turns on if brake hold control is possible when the following conditions required for operation standby are met and the brake hold switch (electric parking brake switch assembly) is turned on while the power switch is on (IG). Conditions required fo ...
