INSTALLATION CAUTION / NOTICE / HINT HINT:
PROCEDURE 1. INSTALL FRONT DOOR COURTESY LIGHT SWITCH ASSEMBLY (a) Connect the connector. (b) Using a T30 "TORX" socket wrench, install the front door courtesy light switch assembly with the screw. Torque: 6.3 N·m {64 kgf·cm, 56 in·lbf} 2. INSTALL CENTER PILLAR LOWER GARNISH Click here 3. CONNECT FRONT SEAT OUTER BELT ASSEMBLY Click here 4. INSTALL LAP BELT OUTER ANCHOR COVER Click here 5. INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP Click here 6. INSTALL REAR DOOR SCUFF PLATE (for Gasoline Model) Click here 7. INSTALL REAR DOOR SCUFF PLATE (for HV Model) Click here 8. INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP Click here 9. INSTALL FRONT DOOR SCUFF PLATE Click here 10. INSTALL REAR SEAT CUSHION LOCK HOOK (for Gasoline Model) Click here 11. INSTALL REAR SEAT CUSHION ASSEMBLY (for Gasoline Model) Click here 12. CONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY (for Gasoline Model) Click here 13. INSTALL LUGGAGE COMPARTMENT INNER TRIM PAD (for Gasoline Model) w/ Seat Heater System: Click here 14. INSTALL SPARE WHEEL COVER ASSEMBLY (for Gasoline Model) w/ Seat Heater System: Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Throttle / Pedal Position Sensor / Switch "A" Circuit Short to Ground (P012011)
DESCRIPTION The throttle position sensor is built into the throttle body with motor assembly and detects the opening angle of the throttle valve. This sensor is a non-contact type sensor. It uses Hall-effect elements in order to yield accurate signals even in extreme driving conditions, such as at h ...
