Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY LH

(a) Apply auxiliary battery voltage to the front door inside handle illumination light assembly LH and check that the lights illuminate.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → 1 (+)

Auxiliary battery negative (-) → 2 (-)

Inside handle lights illuminate

If the result is not as specified, replace the front door inside handle illumination light assembly LH.

*a

Component without harness connected

(Front Door Inside Handle Illumination Light Assembly LH)

2. INSPECT FRONT DOOR INSIDE HANDLE ILLUMINATION LIGHT ASSEMBLY RH

(a) Apply auxiliary battery voltage to the front door inside handle illumination light assembly RH and check that the lights illuminate.

OK:

Measurement Condition

Specified Condition

Auxiliary battery positive (+) → 1 (+)

Auxiliary battery negative (-) → 2 (-)

Inside handle lights illuminate

If the result is not as specified, replace the front door inside handle illumination light assembly RH.

*a

Component without harness connected

(Front Door Inside Handle Illumination Light Assembly RH)

    Components

    Installation

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Brake Pedal(for Hv Model): Adjustment
    ADJUSTMENT PROCEDURE 1. INSPECT AND ADJUST BRAKE PEDAL HEIGHT (a) Remove the front door scuff plate LH. Click here (b) Remove the cowl side trim sub-assembly LH. Click here (c) Remove the No. 1 instrument panel under cover sub-assembly. Click here (d) Remove the accelerator pedal pad. Click here (e) ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2025 Copyright www.tavalon.net
    0.0384