DESCRIPTION The meter
mirror sub-assembly receives signals from the radio and display receiver
assembly via local bus communication and navigation system information
on the headup display. This DTC is stored when the meter mirror sub-assembly cannot receive the signal. |
DTC No. | Detection Item |
DTC Detection Condition | Trouble Area |
Memory | Note | |
B132187 | Lost Communication with EMV Missing Message |
Diagnosis Condition:
- The engine switch is on (IG)
- IG power source voltage is 9.5 V or more
Malfunction Status:
- No communication with radio and display receiver assembly
Malfunction Time:
|
- Harness or connector
- Radio and display receiver assembly
- Combination meter assembly
- Meter mirror sub-assembly
| DTC stored |
- | WIRING DIAGRAM
 PROCEDURE
| 1. |
CHECK FOR DTC (NAVIGATION SYSTEM) | (a) Check if navigation system DTCs are output. Body Electrical > Navigation System > Trouble Codes
|
Result | Proceed to | |
DTCs are not output | A | |
DTCs are output | B |
| B |
 | GO TO NAVIGATION SYSTEM |
|
A |
 | |
| 2. |
CHECK FOR DTC (METER / GAUGE SYSTEM) | (a) Check if meter / gauge system DTCs are output.
Click here  Body Electrical > Combination Meter > Trouble Codes
|
Result | Proceed to | |
DTC B132187 is not output |
A | | DTC B132187 is output |
B |
| A |
| REPLACE METER MIRROR SUB-ASSEMBLY |
| B |
| REPLACE RADIO AND DISPLAY RECEIVER ASSEMBLY | | 
