UTILITY MIRROR POSITION INITIALIZATION HINT: Use this procedure to return the display of the headup display to its initial position. (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Head Up Display / Utility / Mirror Position Reset. (e) Perform the procedure displayed on the Techstream. Body Electrical > Head Up Display > Utility
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Water Pump: Removal
REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during engine water pump assembly (water inlet housing) removal/installation are shown below. Necessary Procedu ...
