Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Customize Parameters

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Interior / Meter / Gauge / Display / Meter / Gauge System(for Gasoline Model) / Customize Parameters

CUSTOMIZE PARAMETERS

NOTICE:

When the customer requests a change in a function, first make sure that the function can be customized.
Be sure to make a note of the current settings before customizing.
When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

CUSTOMIZE METER / GAUGE SYSTEM

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the engine switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Warning or Display.

(5) Select the setting by referring to the table below.

Warning

Tester Display	Description	Default	Setting	ECU
Flasher Sound Volume Adjust	Function to change the flasher sound volume	Medium	$02:Large,$00:Medium,$01:Small	Combination meter assembly
Suggestion Service Function	Function to change the suggestion service display setting	ON	00:OFF,01:Only Parked,11:ON	Main body ECU (Multiplex network body ECU)

Display

Tester Display	Description	Default	Setting	ECU
ODO Display Time After IG OFF Adjust	Function to change the ODO display time after the engine switch is turned off	30s	$00:30s,$01:60s,$02:600s,$03:OFF	Combination meter assembly
ECO Drive Indicator Zone Display Function (Meter)	Function to enable/disable the eco driving indicator zone	ON	$00:OFF,$01:ON	Combination meter assembly

(b) Customizing with the multi-display

(1) Turn the engine switch on (IG).

(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Convenience Services.

(3) Select the setting by referring to the table below.

Display	Default	Content	Setting	Relevant ECU
Convenience Services	On	Function to change the suggestion service display setting	On, On While Stopped, Off	Main body ECU (Multiplex network body ECU)

(1) Turn the engine switch on (IG).

(2) Select the settings tab on the multi-information display and set the customize settings.

Display	Details	Description	Setting	ECU
LDA	Steering Assist	Steering assist function setting	ON/OFF	Forward recognition camera
	Sensitivity	Lane departure warning timing setting	1/2
	Sway Warning	Unsteady driving detection function setting	ON/OFF
	Sway Sensitivity	Unsteady driving detection sensitivity setting	1/2/3
PCS	-	Pre-collision system	ON/OFF	Driving support ECU assembly
PCS	Sensitivity	Warning timing setting	1/2/3	Driving support ECU assembly
BSM	-	Blind spot monitor system	ON/OFF	Blind spot monitor sensor RH
	Brightness	Outer mirror indicator brightness setting	1/2
	Notification Timing	Vehicle detection notification timing setting	1/2/3/4
RCTA	-	Rear crossing traffic alert system	ON/OFF	Blind spot monitor sensor RH
RCTA	Volume	Rear crossing traffic alert system buzzer and blind spot monitor system buzzer volume setting	1/2/3	Blind spot monitor sensor RH
ICS*1	-	Intelligent clearance sonar system	ON/OFF	Clearance warning ECU assembly
Parking Assist*1	-	Intuitive parking assist alert system	ON/OFF	Clearance warning ECU assembly
Parking Assist*1	Volume	Intuitive parking assist alert system volume setting	1/2/3	Clearance warning ECU assembly
Vehicle Settings	TPWS	Tire pressure warning system initialization	Set Pressure	Main body ECU (Multiplex network body ECU)
	TPWS	Select to start tire pressure warning system sensor ID codes registration	Change Wheel	Main body ECU (Multiplex network body ECU)
	Scheduled Maintenance	Scheduled maintenance data reset	Yes/No	Combination meter assembly
Settings	Language	Language display setting	English/Spanish/French	Combination meter assembly
	Units	Units display setting	km (km/L)/km (L/100km)/miles (MPG US)/miles (MPG Imperial)
	ECO	Eco driving indicator light display setting	ON/OFF
	Digital Speed	Digital speedometer display setting	ON/OFF
	Gadget Content	Gadget content display setting	No Display/Average Speed/Distance Travelled/Total Time
	Distance Travelled Type	Fuel economy type display setting	Trip/Total/Tank
	Multi-information Display OFF	Multi-information display OFF setting	-
	Pop-UP Display	Interrupt display setting	TbT Navigation*2/Telephone/Brightness
	Default Settings	Function to return customize settings of combination meter to default setting	Yes/No

*1: w/ Intelligent Clearance Sonar System
*2: w/ Navigation System

Turn Signal/Hazard Flasher Circuit Current Above Threshold (B150819)

Data List / Active Test

See More:

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Pre-collision System(for Hv Model): Lost Communication with Driving Support ECU (U1104)
DESCRIPTION The driving support ECU assembly is connected to the millimeter wave radar sensor assembly, forward recognition camera and skid control ECU (brake booster with master cylinder assembly) via CAN communication. If communication with the millimeter wave radar sensor assembly, forward recogn ...

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Customize Parameters

Turn Signal/Hazard Flasher Circuit Current Above Threshold (B150819)

Data List / Active Test

See More:

Toyota Avalon (XX50) 2019-2022 Owners Manual

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual