Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Customize Parameters

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Interior / Meter / Gauge / Display / Meter / Gauge System(for Hv Model) / Customize Parameters

CUSTOMIZE PARAMETERS

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make a note of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

HINT:

The following items can be customized.

CUSTOMIZE METER / GAUGE SYSTEM

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the power switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Warning or Display.

(5) Select the setting by referring to the table below.

Warning

Tester Display

Description

Default

Setting

ECU

Flasher Sound Volume Adjust

Function to change the flasher sound volume

Medium

$02:Large,$00:Medium,$01:Small

Combination meter assembly

Suggestion Service Function

Function to change the suggestion service display setting

ON

00:OFF,01:Only Parked,11:ON

Main body ECU (Multiplex network body ECU)
Display

Tester Display

Description

Default

Setting

ECU

ODO Display Time After IG OFF Adjust

Function to change the ODO display time after the power switch is turned off

30s

$00:30s,$01:60s,$02:600s,$03:OFF

Combination meter assembly

(b) Customizing with the multi-display

(1) Turn the power switch on (IG).

(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle Customization / Convenience Services.

(3) Select the setting by referring to the table below.

Display

Default

Content

Setting

Relevant ECU

Convenience Services

On

Function to change the suggestion service display setting

On/On While Stopped/Off

Main body ECU (Multiplex network body ECU)

(c) Customizing with the multi-information display

(1) Turn the power switch on (IG).

(2) Select the settings tab on the multi-information display and set the customize settings.

Display

Details

Description

Setting

ECU

LDA

Steering Assist

Steering assist function setting

ON/OFF

Forward recognition camera

Sensitivity

Lane departure warning timing setting

1/2

Sway Warning

Unsteady driving detection function setting

ON/OFF

Sway Sensitivity

Unsteady driving detection sensitivity setting

1/2/3

PCS

-

Pre-collision system

ON/OFF

Driving support ECU assembly

Sensitivity

Warning timing setting

1/2/3

BSM

-

Blind spot monitor system

ON/OFF

Blind spot monitor sensor RH

Brightness

Outer mirror indicator brightness setting

1/2

Notification Timing

Vehicle detection notification timing setting

1/2/3/4

RCTA

-

Rear crossing traffic alert system

ON/OFF

Blind spot monitor sensor RH

Volume

Rear crossing traffic alert system buzzer and blind spot monitor system buzzer volume setting

1/2/3

ICS*1

-

Intelligent clearance sonar system

ON/OFF

Clearance warning ECU assembly

Parking Assist*1

-

Intuitive parking assist alert system

ON/OFF

Clearance warning ECU assembly

Volume

Intuitive parking assist alert system volume setting

1/2/3

Vehicle Settings

TPWS

Tire pressure warning system initialization

Set Pressure

Main body ECU (Multiplex network body ECU)

Select to start tire pressure warning system sensor ID codes registration

Change Wheel

Scheduled Maintenance

Scheduled maintenance data reset

Yes/No

Combination meter assembly

Settings

Language

Language display setting

English/Spanish/French

Combination meter assembly

Units

Units display setting

km (km/L)/km (L/100km)/miles (MPG US)/miles (MPG Imperial)

EV

EV indicator light display setting

ON/OFF

Digital Speed

Digital speedometer display setting

ON/OFF

Gadget Content

Gadget content display setting

No Display/Average Speed/Distance Travelled/Total Time

Distance Travelled Type

Fuel economy type display setting

Trip/Total/Tank

Multi-information Display OFF

Multi-information display OFF setting

-

Pop-UP Display

Interrupt display setting

TbT Navigation*2/Telephone/Brightness

Default Settings

Function to return customize settings of combination meter to default setting

Yes/No
  • *1: w/ Intelligent Clearance Sonar System
  • *2: w/ Navigation System
    Turn Signal/Hazard Flasher Circuit Current Above Threshold (B150819)

    Data List / Active Test

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lane Departure Alert System (w/ Steering Control)(for Gasoline Model): Dtc Check / Clear
    DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Chassis / LKA/LDA / Trouble Codes. (e) Check for details of the DTCs. Click here Chassis > LKA/LDA > Trouble Codes CLEAR DTC (a) Co ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2025 Copyright www.tavalon.net
    0.0123