REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization, or registration) that must be performed after parts are removed and installed, or replaced during inner rear view mirror assembly removal/installation are shown below. Necessary Procedures After Procedure Performed (for Gasoline Model)
PROCEDURE 1. REMOVE NO. 2 FORWARD RECOGNITION COVER Click here
2. REMOVE NO. 1 FORWARD RECOGNITION COVER Click here 3. REMOVE INNER REAR VIEW MIRROR ASSEMBLY
(b) Disengage the clamp. (c) Using a T20 "TORX" socket wrench, remove the screw. (d) Slide the inner rear view mirror assembly as shown in the illustration to remove it. 
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Can Communication System(for Gasoline Model): Active Noise Control ECU Communication Stop Mode
DESCRIPTION Detection Item Symptom Trouble Area Active Noise Control ECU Communication Stop Mode Any of the following conditions are met: Communication stop for "Active Noise Control" is indicated on the "Communication Bus Check" screen of the Techstream. Click here Communication stop history for "A ...
