INSTALLATION PROCEDURE 1. INSTALL NO. 1 POWER OUTLET SOCKET COVER (a) Engage the 2 claws to install the No. 1 power outlet socket cover as shown in the illustration. 
2. INSTALL NO. 1 POWER OUTLET SOCKET ASSEMBLY (a) Engage the claw to install the No. 1 power outlet socket assembly as shown in the illustration. 
3. INSTALL CONSOLE BOX BEZEL Click here
4. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY Click here 5. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY Click here 6. INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY Click here 7. INSTALL CONSOLE BOX POCKET SUB-ASSEMBLY Click here 8. INSTALL FRONT CONSOLE UPPER PANEL GARNISH Click here 9. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL RH Click here 10. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL LH Click here |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Seat Heater System(for Gasoline Model): Terminals Of Ecu
TERMINALS OF ECU CHECK AIR CONDITIONING AMPLIFIER ASSEMBLY (a) Disconnect the G35 air conditioning amplifier assembly connector. (b) Measure the voltage and resistance according to the value(s) in the table below. HINT: Measure the values on the wire harness side with the connector disconnected. Ter ...
