|
Symptom | Suspected Area |
Link |
|
Even when the wireless charging system is turned on, the indicator light (green) does not illuminate |
Wireless charger power source circuit |
 |
|
Mobile wireless charger cradle assembly |
|
|
When
the wireless charging system is turned on, the indicator (green)
illuminates, but the indicator (amber) does not illuminate when a
rechargeable device is placed on the charging area (wireless charging
does not start) | Check that the device being used is a Qi-compatible rechargeable device |
- |
| Remove any cases and accessories |
- |
| Check that there is no gap between the rechargeable device and the charging area |
- |
| Check that there is no foreign matter between the rechargeable device and the charging area |
- |
| Check that the rechargeable device is not fully charged |
- |
| Check that the rechargeable device is centered on the charging area |
- |
| Check that the rechargeable device is placed on the charging area with its charging surface facing down |
- |
| Check that the vehicle is not in an environment where it may be affected by strong radio waves or electrical noise |
- |
| Check if more than 1 rechargeable device is placed on the charging area |
- |
| Check that a charging cable is not connected to the rechargeable device |
- |
| Check that temperature of the rechargeable device is not excessively high or low |
- |
| Check if wireless charging of the rechargeable device is possible using another Qi-compatible wireless charging system |
- |
| Check if wireless charging is possible using another Qi-compatible rechargeable device |
- |
| Status signal circuit |
|
|
Mobile wireless charger cradle assembly |
|
|
When
the wireless charging system is turned on, the indicator (green)
illuminates and when a rechargeable device is placed on the charging
area, the indicator (amber) illuminates, but the indicator (green)
illuminates again before wireless charging is completed (wireless
charging does not complete) | Check if the rechargeable device has not been moved out of the charging area |
- |
| Check that temperature of the rechargeable device is not excessively high or low |
- |
| Check that the vehicle is not in an environment where it may be affected by strong radio waves or electrical noise |
- |
| Status signal circuit |
|
|
Mobile wireless charger cradle assembly |
|
|
When the taillight on, the mobile wireless charger switch does not illuminate |
Wireless charger illumination circuit |
|
|
Mobile wireless charger cradle assembly |
|
|
The mobile wireless charger switch does not dim when the rheostat is operated |
Wireless charger illumination circuit |
|
|
Mobile wireless charger cradle assembly |
|
|
The indicator light (amber) blinks (pattern 1)* |
Status signal circuit |
|
|
Mobile wireless charger cradle assembly |
|
|
The indicator light (amber) blinks (pattern 2)* |
Check if the charging frequency is being changed |
|
|
Mobile wireless charger cradle assembly |
|
|
The indicator light (amber) blinks (pattern 3)* |
Check that the device being used is a Qi-compatible rechargeable device |
- |
| Remove any cases and accessories |
- |
| Check that there is no gap between the rechargeable device and the charging area |
- |
| Check that there is no foreign matter between the rechargeable device and the charging area |
- |
| Check that the rechargeable device is centered on the charging area |
- |
| Check that the rechargeable device is in the same position as when charging was started |
- |
| Mobile wireless charger cradle assembly |
|
|
The indicator light (amber) blinks (pattern 4)* |
Check that temperature of the mobile wireless charger cradle assembly is not excessively high |
- |
| Mobile wireless charger cradle assembly |
|
