CUSTOMIZE PARAMETERS
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Make a note of the current settings before customizing.
HINT: The following PCS functions and the pre-collision system sensitivity setting can be changed from their default setting.
CUSTOMIZE PRE-COLLISION SYSTEM (a) Customizing with the Techstream
(1) Turn the engine switch off. (2) Connect the Techstream to the DLC3.
(3) Turn the engine switch on (IG). (4) Turn the Techstream on.
(5) Enter the following menus: Customize Setting / Others. (6) Select the setting by referring to the table below. Others
|
Tester Display | Description |
Default | Setting |
ECU | | PCS Operation State Retention Setting |
Refer to the table below |
OFF | 0:OFF,1:ON |
Driving support ECU assembly | |
PCS Alarm Activation Distance Retention Setting 1 |
Refer to the table below |
OFF | 0:OFF,1:ON |
Driving support ECU assembly | |
PCS Alarm Activation Distance Retention Setting 2 |
Refer to the table below |
ON | 0:OFF,1:ON |
Driving support ECU assembly | |
PCS Alarm Activation Distance Retention Setting 3 |
Refer to the table below |
OFF | 0:OFF,1:ON |
Driving support ECU assembly | |
Customize Setting | Description |
Setting | | PCS Operation State Retention Setting |
Function to maintain the pre-collision system on/off setting when the engine switch is turned off and then on (IG). |
OFF: Not maintained (Pre-collision system always turns on) ON: Maintained | |
PCS Alarm Activation Distance Retention Setting 1 |
Function
to maintain the sensitivity setting of the pre-collision system when
the pre-collision system is turned off and then on. |
OFF: Not maintained (Setting changes to "Mid") ON: Maintained | |
PCS Alarm Activation Distance Retention Setting 2 |
Function
to maintain the sensitivity setting of the pre-collision system when
the engine switch is turned off while the pre-collision system is on. |
OFF: Not maintained (Setting changes to "Mid") ON: Maintained | |
PCS Alarm Activation Distance Retention Setting 3 |
Function
to maintain the sensitivity setting of the pre-collision system when
the engine switch is turned off while the pre-collision system is off. |
OFF: Not maintained (Setting changes to "Mid") ON: Maintained | | 
