Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Front Camera Module Beam Axis Not Adjusted (C1AA9)

DESCRIPTION

If forward recognition camera adjustment has not been performed or did not complete normally after the forward recognition camera was replaced with a new one, DTC C1AA9 will be stored.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

C1AA9

Front Camera Module Beam Axis Not Adjusted

When the pre-collision system is on, the driving support ECU assembly detects that forward recognition camera adjustment has not been completed for 0.3 seconds or more.

Front camera system

PROCEDURE

1.

GO TO FRONT CAMERA SYSTEM

HINT:

If DTC C1AA9 is output by the pre-collision system, perform troubleshooting for the front camera system.

Click here

NEXT

END

    Front Camera Module Circuit (C1AA0)

    Heater Circuit (C1AAE)

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Panoramic View Monitor System(for Gasoline Model): Camera Position Adjustment Incomplete (C1697)
    DESCRIPTION This DTC is stored when the parking assist ECU judges that the camera initial setting has not been memorized (camera view adjustment is incomplete). DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from C1697 Camera Position Adjustment Incomplete Camera initial sett ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0128