INSTALLATION CAUTION / NOTICE / HINT PROCEDURE 1. INSTALL FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side) (a) Install the front seat belt anchor plate as shown in the illustration. 
(b) Install the front seat inner belt assembly LH with the nut. 
Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow the anchor part of the front seat inner belt assembly LH to overlap the protruding part of the separate type front seat cushion spring assembly. (c) Engage each clamp. (d) Connect each connector. 2. INSTALL FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side) (a) Install the front seat belt anchor plate as shown in the illustration. 
(b) Install the front seat inner belt assembly RH with the nut. 
Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: Do not allow the anchor part of the front seat inner belt assembly RH to overlap the protruding part of the separate type front seat cushion spring assembly. (c) Engage each clamp. (d) Connect each connector. 3. INSTALL FRONT SEAT ASSEMBLY Click here
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Electronically Controlled Brake System(for Gasoline Model): Brake Warning Light does not Come ON
DESCRIPTION The skid control ECU (brake actuator assembly) is connected to the combination meter assembly via CAN communication. CAUTION / NOTICE / HINT NOTICE: When replacing the skid control ECU (brake actuator assembly), perform system variant learning and acceleration zero point calibration. Cli ...
