ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to correctly follow the removal and installation procedures for the front seat outer belt assembly. PROCEDURE 1. INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. for HV Model: Click here
for Gasoline Model: Click here
(b) Visually check for defects with the front seat outer belt assembly installed to the vehicle. (1) The defects to be checked are as follows:
OK: No defects are found. HINT: If any defects are found, replace the front seat outer belt assembly with a new one. 2. INSPECT FRONT SEAT OUTER BELT ASSEMBLY (for Vehicle Involved in Collision) (a) Perform a diagnostic system check. for HV Model: Click here
for Gasoline Model: Click here
(b) Visually check for defects with the front seat outer belt assembly removed from the vehicle. (1) The defects to be checked are as follows:
OK: No defects are found. HINT: If any defects are found, replace the front seat outer belt assembly with a new one. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Smart Key System(for Start Function, Hv Model): IG2 Signal Malfunction (B2788)
DESCRIPTION This DTC is stored when the steering lock ECU (steering lock actuator or upper bracket assembly) detects an IG2 power supply malfunction. HINT: The steering lock ECU (steering lock actuator or upper bracket assembly) is not connected to the CAN communication system. However, the steering ...
