Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

Toyota Avalon (XX50) 2019-2022 Service & Repair Manual / Vehicle Interior / Seat Belt / Rear Center Seat Outer Belt Assembly / Inspection

INSPECTION

PROCEDURE

1. INSPECT REAR CENTER SEAT OUTER BELT ASSEMBLY

(a) Before installing the rear center seat outer belt assembly, check the ELR function.

NOTICE:

Do not disassemble the retractor.

(1) When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks.

If the result is not as specified, replace the rear center seat outer belt assembly.

*a

Retractor

*b

Unlock

*c

Lock

*d

45°
    Components

    Installation

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Engine Coolant Temperature Sensor 1 Circuit Short to Battery or Open (P011515)
    DESCRIPTION Refer to DTC P011511. Click here HINT: When DTC P011515 is stored, the ECM enters fail-safe mode. During fail-safe mode, the engine coolant temperature is estimated to be 80°C (176°F) by the ECM. Fail-safe mode continues until a pass condition is detected. DTC No. Detection Item DTC De ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0151