INSPECTION PROCEDURE 1. INSPECT REAR SEAT INNER BELT ASSEMBLY LH (for Gasoline Model)
(a) Inspect the rear seat inner with center belt assembly LH (for LH).
| (1) Measure the resistance according to the value(s) in the table below.
Standard Resistance: |
Tester Connection | Condition |
Specified Condition | |
4 - 3 | Rear LH seat belt unfastened |
Below 1 Ω | If the result is not as specified, replace the rear seat inner with center belt assembly LH. |
 |
|
*a | Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH (for LH)) | | |
(b) Inspect the rear seat inner with center belt assembly LH (for center).
| (1) Measure the resistance according to the value(s) in the table below.
Standard Resistance: |
Tester Connection | Condition |
Specified Condition | |
1 - 2 | Rear center seat belt unfastened |
Below 1 Ω | If the result is not as specified, replace the rear seat inner with center belt assembly LH. |
|
|
|
*a | Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH (for Center)) | | |
2. INSPECT REAR SEAT INNER BELT ASSEMBLY LH (for HV Model) (a) Inspect the rear seat inner with center belt assembly LH (for LH).
| (1) Measure the resistance according to the value(s) in the table below.
Standard Resistance: |
Tester Connection | Condition |
Specified Condition | |
5 - 4 | Rear LH seat belt unfastened |
Below 1 Ω | If the result is not as specified, replace the rear seat inner with center belt assembly LH. |
 |
|
*a | Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH (for LH)) | | |
(b) Inspect the rear seat inner with center belt assembly LH (for center).
| (1) Measure the resistance according to the value(s) in the table below.
Standard Resistance: |
Tester Connection | Condition |
Specified Condition | |
1 - 2 | Rear center seat belt unfastened |
Below 1 Ω | If the result is not as specified, replace the rear seat inner with center belt assembly LH. |
|
|
|
*a | Component without harness connected
(Rear Seat Inner with Center Belt Assembly LH (for Center)) | | | | 
