REMOVAL PROCEDURE 1. REMOVE SPARE WHEEL COVER ASSEMBLY Click here 2. REMOVE LUGGAGE COMPARTMENT INNER TRIM PAD Click here 3. REMOVE REAR SEAT HEADREST ASSEMBLY Click here 4. DISCONNECT REAR CENTER SEAT OUTER BELT ASSEMBLY Click here 5. REMOVE REAR SEAT CUSHION ASSEMBLY Click here 6. REMOVE REAR SEAT CUSHION LOCK HOOK Click here 7. REMOVE REAR SEATBACK ASSEMBLY LH Click here 8. REMOVE REAR SEATBACK ASSEMBLY RH Click here 9. REMOVE REAR SEAT INNER BELT ASSEMBLY LH
(b) Disengage the clamp. (c) Remove the bolt and rear seat inner with center belt assembly LH. HINT: The bolt cannot be removed from the rear seat inner with center belt assembly LH. |
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Sfi System: Crankshaft Position Sensor "A" Signal Stuck in Range (P03352A,P033531)
DESCRIPTION Refer to DTC P033511. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory Note P03352A Crankshaft Position Sensor "A" Signal Stuck in Range No crankshaft position sensor signal to the ECM while the engine running (1 trip detection logic). Open or short in cr ...
