DATA LIST / ACTIVE TEST DATA LIST NOTICE:
In
the following table, the values listed under "Normal Condition" are
reference values. Do not depend solely on these reference values when
deciding whether a part is faulty or not. HINT: Using
the Techstream to read the Data List allows the values or states of
switches, sensors, actuators and other items to be read without removing
any parts. This non-intrusive inspection can be very useful because
intermittent conditions or signals may be discovered before parts or
wiring is disturbed. Reading the Data List information early in
troubleshooting is one way to save diagnostic time. (a) Connect the Techstream to the DLC3.
(b) Turn the engine switch on (IG). (c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Combination Meter, Occupant Detection, SRS Airbag or Main Body / Data List.
(e) Read the Data List according to the display on the Techstream. Body Electrical > Combination Meter > Data List
|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note | |
Rear Right Seat Buckle / Occupant Detection Warning Switch |
Rear seat inner with center belt RH buckle signal |
ON or OFF | OFF: Rear RH seat belt fastened
ON: Rear RH seat belt not fastened |
- | | Rear Left Seat Buckle / Occupant Detection Warning Switch |
Rear seat inner belt LH (for LH) buckle signal |
ON or OFF | OFF: Rear LH seat belt (for LH) fastened
ON: Rear LH seat belt (for LH) not fastened |
- | | Rear Center Seat Buckle / Occupant Detection Warning Switch |
Rear seat inner belt LH (for center) buckle signal |
ON or OFF | OFF: Rear LH seat belt (for center) fastened
ON: Rear LH seat belt (for center) not fastened |
- | | Driver Seatbelt Warning Buzzer Function |
Driver seat belt warning buzzer |
ON or OFF | Customized setting displayed |
- | | Passenger Seatbelt Warning Buzzer Function |
Front passenger seat belt warning buzzer |
ON or OFF | Customized setting displayed |
- | | Rear Right Seatbelt Warning Buzzer Function |
Rear RH seat belt warning buzzer |
ON or OFF | Customized value displayed |
- | | Rear Left Seatbelt Warning Buzzer Function |
Rear LH seat belt warning buzzer |
ON or OFF | Customized value displayed |
- | | Rear Center Seatbelt Warning Buzzer Function |
Rear center seat belt warning buzzer |
ON or OFF | Customized value displayed |
- | Body Electrical > Occupant Detection > Data List
|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note | |
Passenger Buckle SW | Front passenger buckle switch |
Unset, Set or NG | Unset: Seat belt not fastened
Set: Seat belt fastened NG: Data is not determined |
- | Body Electrical > SRS Airbag > Data List
|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note | |
Left side Buckle SW | LH buckle switch |
Unset, Set or NG | Unset: Seat belt not fastened
Set: Seat belt fastened NG: Data is not determined |
- | | Right side Buckle SW |
RH buckle switch | Unset, Set or NG |
Unset: Seat belt not fastened Set: Seat belt fastened NG: Data is not determined |
- | Body Electrical > Main Body > Data List
|
Tester Display | Measurement Item |
Range | Normal Condition |
Diagnostic Note | |
RR Door Courtesy SW | Rear door courtesy light switch RH |
ON or OFF | ON: Rear door RH open
OFF: Rear door RH closed |
- | | RL Door Courtesy SW |
Rear door courtesy light switch LH |
ON or OFF | ON: Rear door LH open
OFF: Rear door LH closed |
- | ACTIVE TEST HINT:
Using
the Techstream to perform Active Tests allows relays, VSVs, actuators
and other items to be operated without removing any parts. This
non-intrusive functional inspection can be very useful because
intermittent operation may be discovered before parts or wiring is
disturbed. Performing Active Tests early in troubleshooting is one way
to save diagnostic time. Data List information can be displayed while
performing Active Tests. (a) Connect the Techstream to the DLC3. (b) Turn the engine switch on (IG).
(c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Combination Meter / Active Test.
(e) Perform the Active Test according to the display on the Techstream. Body Electrical > Combination Meter > Active Test
|
Tester Display | Measurement Item |
Control Range | Diagnostic Note | |
Buzzer Operation (800Hz, Vol L, W/ Damping) |
Combination meter buzzer
- Frequency: 800Hz
- Volume: Large
- Fading tone
| ON |
- | | Buzzer Operation (800Hz, Vol L, W/O Damping) |
Combination meter buzzer
- Frequency: 800Hz
- Volume: Large
- Continuous tone
| ON |
- | | Buzzer Operation (800Hz, Vol S, W/ Damping) |
Combination meter buzzer
- Frequency: 800Hz
- Volume: Small
- Fading tone
| ON |
- | | Buzzer Operation (800Hz, Vol S, W/O Damping) |
Combination meter buzzer
- Frequency: 800Hz
- Volume: Small
- Continuous tone
| ON |
- | | Driver Side Seat Belt Warning |
Driver side seat belt warning light |
OFF/ON | - | |
Passenger Side Seat Belt Warning |
Front passenger side seat belt warning light |
OFF/ON | Not applicable to this vehicle | |
Rear Seat Belt Warning |
Rear seat belt warning light |
OFF/ON | - | | 
