Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE FRONT POWER SEAT CONTROL SYSTEM (w/ Memory)

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Record the current settings before customizing.

HINT:

The following items can be customized.

(a) Customizing with the Techstream

(1) Connect the Techstream to the DLC3.

(2) Turn the engine switch on (IG).

(3) Turn the Techstream on.

(4) Enter the following menus: Customize Setting / Smart Key / Access or Seat.

(5) Select the setting by referring to the table below.

Smart Key / Access

Tester Display

Description

Default

Setting

ECU

Seat position/Tilt & Telesco memory recall setting

This customize function switches the condition of the seat position and Tilt & Telesco memory recall. Possible recall activation parameter "D-door unlock and open by smart system" or "Any door unlock and open with smart system".

D Door

0:D Door,1:Any Door

Main body ECU (Multiplex network body ECU)

Seat

Tester Display

Description

Default

Setting

ECU

D Seat Operation Interference Avoidance Function

Function to reverse operation when jam detection is detected during slide direction driver seat

ON

0:ON,1:OFF

Position control ECU assembly

Seat Move Distance

Allows customizing of the seat movement distance for the power easy access system.

Standard

00:OFF,01:Little,10:Standard

Main body ECU (Multiplex network body ECU)

(b) Customizing with the multi-display

(1) Turn the engine switch on (IG).

(2) Enter the following menus: MENU / Setup / Vehicle / Vehicle customization / Other Vehicle Settings.

(3) Select the setting by referring to the table below.

Display

Description

Default

Setting

Relevant ECU

Driver's seat Easy-Exit Slide

Allows customizing of the seat movement distance for the power seat power easy access system.

Full

Off / Partial / Full

Main body ECU (Multiplex network body ECU)

    Short in Sensor with Motor Power Supply Circuit (B2658)

    Data List / Active Test

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Lighting System(for Gasoline Model): Precaution
    PRECAUTION PRECAUTION FOR DISCONNECTING CABLE FROM NEGATIVE BATTERY TERMINAL NOTICE: When disconnecting the cable from the negative (-) battery terminal, initialize the following systems after the cable is reconnected. System Name See Procedure Lane Departure Alert System (w/ Steering Control) Pre-c ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0125