Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Registration

REGISTRATION

PROCEDURE

1. MEMORY CALL REGISTRATION

(a) Memory registration

NOTICE:

• Do not bring 2 or more electrical key transmitter sub-assemblies into the cabin.
• Do not press and hold the door control switch on the multiplex network master switch assembly for 3 seconds or more.

(1) Register the seat position to a seat memory switch (M1 or M2 switch) in advance.

(2) Sit on the driver seat carrying only the electrical key transmitter sub-assembly to which a seat position is to be registered.

(3) With the power switch on (IG) and the shift lever in P, restore the seat to the memorized position to be registered.

(4) With the power switch on (IG), the shift lever in P, the driver door closed and a seat memory switch (M1 or M2 switch) being pressed and held, press and hold the door control switch on the multiplex network master switch assembly until the buzzer answer-back function operates.

HINT:

• The door control switch on the multiplex network master switch assembly can be pressed to either the lock or unlock side.
• The buzzer will sound for 0.5 seconds when the registration is complete.
• The buzzer will sound for 3 seconds if the registration fails.

(b) Memory deletion

NOTICE:

• Do not bring 2 or more electrical key transmitter sub-assemblies into the cabin.
• Do not press and hold the door control switch on the multiplex network master switch assembly for 3 seconds or more.

(1) Sit on the driver seat carrying only the electrical key transmitter sub-assembly from which the seat position is to be deleted.

(2) With the power switch on (IG), the shift lever in P, the driver door closed and the SET seat memory switch being pressed and held, press and hold the door control switch on the multiplex network master switch assembly until the answer-back by the buzzer is confirmed.

HINT:

• The door control switch on the multiplex network master switch assembly can be pressed to either the lock or unlock side.
• The buzzer will sound for 0.5 seconds when the memory deletion is complete.
• The buzzer will sound for 3 seconds if the memory deletion fails.

2. POSITION CONTROL ECU ASSEMBLY INITIALIZATION

NOTICE:

Initializing the position control ECU assembly will clear the seat position memory.

HINT:

• Make sure to initialize the position control ECU assembly after replacing the seat assembly or any related parts.
• Before initializing the position control ECU assembly, make sure that the D/C CUT fuse is normal.
• When any of the following conditions are met, the seat position information in the position control ECU assembly will be cleared.
  • The power switch is turned off with any of the seat switches being operated and the D/C CUT fuse removed.
  • The power switch is turned off within 1 second of any of the seat switches being operated with the D/C CUT fuse removed.
  • Power supplied to the position control ECU assembly is cut while the seat is moving to the memorized position.

(a) Turn the power switch on (IG).

(b) Operate the slide and vertical power seat switch knob to tilt the front of the power seat downward 3 times.

(c) Within 10 seconds of operating the slide and vertical power seat switch knob, simultaneously operate and hold the reclining power seat switch knob and slide and vertical power seat switch knob to recline and move the power seat upward until a buzzer sounds.

(d) Operate and hold the slide power seat switch knob to move the power seat to the foremost position. Continue holding the switch for 1 second after the seat has stopped.

(e) Operate and hold the reclining power seat switch knob to move the seatback to the foremost position. Continue holding the switch for 1 second after the seatback has stopped.

(f) Operate and hold the lifter power seat switch knob to move the power seat to the lowermost position. Continue holding the switch for 1 second after the seat has stopped.

(g) Operate and hold the vertical power seat switch knob to move the seat cushion to the lowermost position. Continue holding the switch for 1 second after the seat cushion has stopped.