Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: Inspection

INSPECTION

PROCEDURE

1. INSPECT REAR SEAT CUSHION HEATER ASSEMBLY (for LH Side)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

A-1 - K57-2

Seat heater temperature 23 °C (73 °F)

4.61 to 5.64 Ω

A-1 - K57-1

Seat heater temperature 23 °C (73 °F)

4.61 to 5.64 Ω

A-2 - K57-2

Always

Below 1 Ω

If the result is not as specified, replace the rear seat cushion heater assembly.

*a

Component without harness connected

(Rear Seat Cushion Heater Assembly)

2. INSPECT REAR SEAT CUSHION HEATER ASSEMBLY (for RH Side)

(a) Measure the resistance according to the value(s) in the table below.

Standard Resistance:

Tester Connection

Condition

Specified Condition

C-1 - K58-2

Seat heater temperature 23 °C (73 °F)

4.61 to 5.64 Ω

C-1 - K58-1

Seat heater temperature 23 °C (73 °F)

4.61 to 5.64 Ω

C-2 - K58-2

Always

Below 1 Ω

If the result is not as specified, replace the rear seat cushion heater assembly.

*a

Component without harness connected

(Rear Seat Cushion Heater Assembly)

    Components

    Installation

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Knee Airbag Assembly(for Front Passenger Side): Removal
    REMOVAL CAUTION / NOTICE / HINT The necessary procedures (adjustment, calibration, initialization or registration) that must be performed after parts are removed and installed, or replaced during lower No. 2 instrument panel airbag assembly removal/installation are shown below. Necessary Procedures ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2024 Copyright www.tavalon.net
    0.0143