INSPECTION PROCEDURE 1. INSPECT REAR SEATBACK HEATER ASSEMBLY (for LH Side)
(a) Check the rear seatback heater assembly.
| (1) Measure the resistance according to the value(s) in the table below.
Standard Resistance: |
Tester Connection | Condition |
Specified Condition | |
1 - 2 | Seat heater temperature 23 °C (73 °F) |
5.05 to 6.18 Ω | If the result is not as specified, replace the rear seatback heater assembly. |
 |
|
*a | Component without harness connected
(Rear Seatback Heater Assembly) | | |
2. INSPECT REAR SEATBACK HEATER ASSEMBLY (for RH Side) (a) Check the rear seatback heater assembly.
| (1) Measure the resistance according to the value(s) in the table below.
Standard Resistance: |
Tester Connection | Condition |
Specified Condition | |
1 - 2 | Seat heater temperature 23 °C (73 °F) |
5.05 to 6.18 Ω | If the result is not as specified, replace the rear seatback heater assembly. |
|
|
|
*a | Component without harness connected
(Rear Seatback Heater Assembly) | | | | 
