DESCRIPTION Output to the front seat cushion heater temperature sensor stops if one of the following occurs: 1) the temperature sensor is open or shorted; or 2) the temperature sensor is damaged and its output value does not change.
WIRING DIAGRAM PROCEDURE
(a) Clear the DTCs. Click here Body Electrical > Air Conditioner > Clear DTCs
(a) Check for DTCs. Click here Body Electrical > Air Conditioner > Trouble CodesOK: DTC B14C0 is not output.
(a) Disconnect the R6 front seat cushion heater assembly RH connector.
(a) Disconnect the G37 air conditioning amplifier assembly connector. (b) Measure the resistance according to the value(s) in the table below. Standard Resistance:
|
Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Audio And Visual System(for Gasoline Model): Voice Guidance does not Function
CAUTION / NOTICE / HINT NOTICE: Depending on the parts that are replaced during vehicle inspection or maintenance, performing initialization, registration or calibration may be needed. Refer to Precaution for Audio and Visual System. Click here When replacing the radio and display receiver assembly, ...