Toyota Avalon (XX50) 2019-2022 Service & Repair Manual: On-vehicle Inspection

ON-VEHICLE INSPECTION

CAUTION / NOTICE / HINT

CAUTION:

Be sure to correctly follow the removal and installation procedures for the occupant detection ECU.

PROCEDURE

1. INSPECT OCCUPANT DETECTION ECU (for Vehicle not Involved in Collision)

(a) Perform a diagnostic system check.

for Gasoline Model: Click here

for HV Model: Click here

2. INSPECT OCCUPANT DETECTION ECU (for Vehicle Involved in Collision)

(a) Perform a diagnostic system check.

for Gasoline Model: Click here

for HV Model: Click here

(b) Visually check for defects with the occupant detection ECU.

HINT:

The defects are as follows:

  • Cracks in the ECU housing
  • Dents in the ECU housing
  • Chips in the ECU housing
  • Cracks or other damage to the connector
  • Damage to the serial number

OK:

No defects are found.

If any defects are found, replace the occupant detection ECU with a new one.

    Installation

    Removal

    See More:

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual > Spiral Cable: Installation
    INSTALLATION PROCEDURE 1. INSPECT SPIRAL CABLE SUB-ASSEMBLY NOTICE: If the steering sensor is installed to a misaligned spiral cable sub-assembly, spiral cable with sensor sub-assembly malfunction DTCs, such as DTC B1801, C1231 and C1433, will be stored and it will be impossible to clear them. If th ...

    Toyota Avalon (XX50) 2019-2022 Owners Manual

    Toyota Avalon (XX50) 2019-2022 Service & Repair Manual

    © 2025 Copyright www.tavalon.net
    0.0182